Brand: Miele
Category: Dishwasher
Document Type: Manual
Language: EN
Manual for G 600 and G 800 Dishwashers
Uploaded: Nov. 21, 2025, 7:49 p.m.
Manual Publish Date: 2011-01-01
Commissioning and Operation
3.1 Door Handle and Door Lock (Novotronic/Touchtronic Series)
Press the release catch inside the door grip.Note: If the door is opened during operation, the dishwasher will stop running. Once the door is closed the program will restart.
3.2 Closing the Dishwasher Door
To close the door, push the baskets in, then lift the door and push until it clicks into place.3.3 Child Safety Lock
- Horizontal setting = Door is locked.
- Vertical setting = Door can be opened.
Troubleshooting and error codes
| Program button 6 | Program button light | Fault code and description |
|---|---|---|
| Not pressed | 1 | F00 No error |
| Not pressed | 2 | F01 NTC or NTC connections open-circuited |
| Not pressed | 3 | F02 NTC or NTC connections short-circuited |
| Not pressed | 4 | F03 Electronic failure, selector switch position not found |
| Not pressed | 5 | F04 Heating failure - heating circuit opened or defective electrical component in heating circuit |
| Pressed | 1 | F05 Water drainage failure, heater level switch |
| Pressed | 2 | F06 Too few pulses at flow meter/start of water intake |
| Pressed | 3 | F07 Too few pulses at flow meter/end of water intake |
| Pressed | 4 | F08 Water intake failure, heater level switch |
| Pressed | 5 | F09 Heater level switch not switching on at the end of thermal stops |