Brand: Miele
Category: Dishwasher
Document Type: Manual
Language: EN
Manual for G 6XX
Uploaded: Nov. 21, 2025, 8:04 p.m.
- Read operating and installation instructions before use to avoid accidents or damage.
- Ensure dishwasher is correctly installed and connected.
- Use only detergents, rinse aid, and salt formulated for domestic dishwashers.
- Load dishwasher carefully, ensuring spray arms are not blocked and items are securely positioned.
- Select appropriate programme based on soiling and item type.
- Regularly clean filters, spray arms, and wash cabinet.
- Ensure correct water hardness is programmed and salt reservoir is filled as needed.
- Utilize energy-saving tips for economical operation.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher does not run | Power supply failure | – Check fuse/circuit breaker. – Check if the plug is properly inserted. |
| Door not closed properly | – Close the door until it clicks into position. | |
| Water inlet valve closed | – Open the stopcock. | |
| Programme not set | – Select a programme. | |
| Delayed start selected | – Cancel delayed start. | |
| Dishwasher does not fill with water | Stopcock not turned on | – Turn on the stopcock. |
| Inlet hose kinked or blocked | – Straighten the hose. – Clean the inlet hose filter. |
|
| Program selected is only a rinse | – Select a different programme. | |
| Water remains in the dishwasher | Drain hose kinked or blocked | – Straighten the hose. – Clean the drain pump filter. |
| Drain pump faulty | – Contact Miele Service. | |
| Dishwasher is noisy | Items not secured | – Secure all items. |
| Spray arms hitting items | – Rearrange items so spray arms can move freely. | |
| Pump or motor bearings worn | – Contact Miele Service. | |
| Cloudy or spotted results | Water hardness too high | – Check and adjust water hardness setting. – Ensure sufficient salt is added. |
| Rinse aid dispenser empty | – Refill rinse aid reservoir. | |
| Incorrect amount of detergent | – Use the correct amount of detergent. | |
| Programme not suitable | – Select a more intensive programme. | |
| Dishes not clean | Items are too close together | – Load dishwasher less densely. |
| Spray arms blocked | – Clean spray arms. | |
| Filters dirty | – Clean filters. | |
| Incorrect programme | – Select a more intensive programme. | |
| Food residues not removed | – Remove coarse food residues before loading. | |
| Door not opening/closing properly | Obstruction in the door seal | – Check and clean door seal. |
| Basket runners obstructed | – Ensure basket runners are clear. | |
| Door locking mechanism faulty | – Contact Miele Service. |