Brand: Miele
Category: Dishwasher
Document Type: Manual
Language: EN
Manual for HG07
Uploaded: Nov. 21, 2025, 7:45 p.m.
Warranty Information
Consult your Miele dealer for warranty terms and conditions.
- Turning on/off: Use the On/Off button to start or end operation.
- Program selection: Select a program using the Program button (e.g., Normal, Pots, Quick, Sani, Rinse).
- Program options: Options like Timer, Express, Audible signals, refill reminders, Extra clean, Extra Dry can be adjusted.
- Loading: Follow general guidelines for loading the upper and lower baskets and cutlery tray/basket.
- Detergents: Use appropriate dishwasher detergents.
- Before first use: Ensure rinse aid is filled and adjust dosage if needed.
- Cleaning and care: Regular cleaning of the wash cabinet, door, filters, and spray arms is recommended.
- Troubleshooting: Refer to the FAQs for common issues and fault messages.
Troubleshooting and error codes
| Fault / Error Message | Possible Cause | Remedy |
|---|---|---|
| Fault message display | The appliance displays an error code | Switch off the dishwasher and unplug it. Wait for 30 seconds and switch it back on again. If the fault persists, contact Miele Customer Service. |
| Water intake fault | Water intake hose is kinked or blocked. | Check the water intake hose for kinks and blockages. |
| Water tap is not open. | Open the water tap. | |
| Water drainage fault | Drain hose is kinked or blocked. | Check the drain hose for kinks and blockages. |
| Filter combination is blocked. | Clean the filter combination. | |
| General dishwasher problems | No program starts. | Check power supply and ensure the door is closed properly. |
| Noises | Normal operational noises. | Some noises are normal during operation. |
| Poor cleaning results | Dishwasher is overloaded. | Reduce the load. |
| Spray arms are blocked. | Clean the spray arms. | |
| Filters are blocked. | Clean the filters. | |
| Incorrect detergent dosage. | Adjust detergent dosage. |