Brand: Miele
Category: Dishwasher
Document Type: Manual
Language: EN
Manual for HG07-W
Uploaded: Nov. 21, 2025, 7:10 p.m.
Warranty Information
Contact Miele for warranty service and only use authorised technicians for repairs.
Operation Summary
Switching On/Off: Use the On/Off sensor control (13) to turn the dishwasher on and off.
Programme Selection: Use the Programme selection sensor controls (1) to choose a programme. The display (2) shows programme details.
Starting a Programme: Press the Start sensor control (4) to begin the selected programme.
Programme Options: Adjust options like Timer (6), Express (7), AutoDos (5), or IntenseZone (3) as needed.
Programme Duration: The display shows the estimated time left for the programme to run.
End of Programme: The dishwasher will indicate when the programme has finished.
Unloading: Open the door carefully and unload the dishes. Allow hot crockery to cool.
Interrupting/Cancelling: Programmes can be interrupted or cancelled using the controls.
Troubleshooting and error codes
| Fault message | Possible cause | Remedy |
| Water inlet fault | The water tap is not turned on. | Turn on the water tap. |
| The water filter is blocked. | Clean the water filter. | |
| The water inlet hose is kinked. | Lay the water inlet hose without kinks. | |
| Water drainage fault | The waste pipe is blocked. | Clean the waste pipe. |
| The filters in the wash cabinet are blocked. | Clean the filters. | |
| The drain hose is kinked. | Lay the drain hose without kinks. | |
| Fault in the AutoDos (automatic dispensing) | The PowerDisk is empty. | Insert a new PowerDisk. |
| The AutoDos compartment is dirty. | Clean the AutoDos compartment. | |
| Spray arm fault | The spray arms are blocked. | Clean the spray arms. |
| Unsatisfactory washing result | The dishwasher is overloaded. | Do not overload the dishwasher. |
| The spray arms are blocked. | Clean the spray arms. | |
| The filters are blocked. | Clean the filters. | |
| Incorrect detergent dosage. | Adjust the detergent dosage. |