Brand: Miele
Category: Dishwasher
Document Type: Manual
Language: EN
Manual for HG07
Uploaded: Nov. 21, 2025, 6:17 p.m.
Operation
Switching on the dishwasher: Press the ON/OFF button.
Selecting a programme: Use the programme selection buttons to choose from ECO, Auto, Gentle, QuickPowerWash, or Intensive programmes. The selected programme is displayed.
Programme running time: The display shows the estimated running time of the selected programme.
Starting the programme: Press the Start button.
Energy management: Optimise energy consumption by selecting appropriate programmes and ensuring the dishwasher is fully loaded.
Switching off the dishwasher: Press the ON/OFF button.
Unloading the crockery: Open the door carefully after the programme has finished and allow dishes to cool before unloading.
Interrupting a programme: Press the ON/OFF button. To resume, press the ON/OFF button again and then the Start button.
Cancelling or changing a programme: Switch the dishwasher off and then on again to select a new programme.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
| Dishwasher does not switch on | The appliance is not switched on. | Switch the appliance on using the ON/OFF button. |
| Water is not being supplied or is insufficient | The tap is turned off. | Turn on the tap. |
| The water inlet hose is kinked or blocked. | Straighten the hose. Check for blockages. | |
| The water inlet filter is blocked. | Clean the water inlet filter. | |
| Water is not draining | The drain hose is kinked or blocked. | Straighten the hose. Check for blockages. |
| The filters in the wash cabinet are blocked. | Clean the filters. | |
| The drain pump is blocked. | Clean the drain pump. | |
| Noises | Improperly loaded dishes. | Load dishes correctly. |
| The spray arms are hitting dishes. | Adjust the position of the dishes. | |
| Unsatisfactory washing result | Dishes are too dirty for the selected programme. | Select a more intensive programme. |
| The spray arms are blocked. | Clean the spray arms. | |
| The filters are blocked. | Clean the filters. | |
| Insufficient detergent or rinse aid. | Check detergent and rinse aid levels. | |
| Salt reservoir is empty. | Fill the salt reservoir. |