Brand: Miele
Category: Freezer
Document Type: Manual
Language: EN
Manual for F 1411 Vi
Uploaded: Nov. 21, 2025, 7:33 p.m.
Warranty Information
None
Before First Use
Clean the interior with warm water and mild dish soap. If transported horizontally, let the appliance stand upright for 8 hours before connecting.Turning On/Off
Open the door and use the main switch located beneath the control panel. The appliance starts cooling and interior lights turn on. Do not place food until preset temperatures are reached. Turning off the main switch does not disconnect power supply.Settings
Touch the "I" access button to enter settings mode. Use other sensor buttons to adjust temperature, select SuperCool, or control the ice maker. Touch "I" again to exit settings mode; settings are stored.Temperature and Alarms
The appliance has a temperature and door alarm system. The temperature alarm activates if the freezer becomes too warm, and the door alarm if the door is left open for five minutes. Alarms can be turned off early by pressing the "alarm" sensor button.Setting Temperature
Touch the "I" button to access temperature settings. Use the "V" and "∧" buttons to adjust the temperature. The temperature range is 7°F to -11°F (-14°C to -24°C). For freezing, 0°F (-18°C) is suggested.Ice Cube Maker
Ensure the ice cube container is under the maker. Turn on with the ice cube maker sensor button. The first three containers of ice cubes should be discarded. Water connection is required.Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance is not operating | Appliance is not switched on. | Switch the appliance on using the main switch. |
| Power supply is interrupted. | Check fuse or circuit breaker. | |
| Not enough ice cubes / no ice cubes | Water supply is not connected or turned off. | Connect and turn on the water supply. |
| Ice cube maker is switched off. | Switch on the ice cube maker. | |
| Ice cube container is not inserted correctly. | Insert the ice cube container correctly. | |
| Water supply is too hot or too cold. | Water temperature should be between 45°F (7°C) and 90°F (32°C). | |
| Appliance is noisy | Appliance is not level. | Level the appliance using the adjustable feet. |
| Parts are vibrating against each other or against the wall. | Ensure no parts are touching the appliance. | |
| Temperature alarm sounds | Door is not closed properly or was left open too long. | Close the door properly. Check door seals. |
| Large amounts of warm food have been placed in the appliance. | Allow food to cool before placing it in the freezer. | |
| Appliance is not sufficiently cool. | Check temperature setting. Allow time for cooling. | |
| Door alarm sounds | Door is not closed properly or was left open too long. | Close the door properly. Check door seals. |