Brand: Miele
Category: Fridge-Freezer
Document Type: Manual
Language: EN
Manual for KF 888 iDN-1
Uploaded: Nov. 21, 2025, 6:22 p.m.
Warranty Information
Refer to the warranty card for details.
Switching on and off
Before first use: Clean interior and accessories. Allow appliance to stand for 1.5-2 hours before connecting to mains.
Switching on: Press master switch or on/off button. Display shows bars, buzzer sounds. Allow to run for a few hours before loading.
Switching off: Press master switch. Display goes out. If not, safety lock is engaged.
Switching refrigerator section off separately: Press the refrigerator section's on/off button. Its display goes out.
Switching refrigerator section back on: Press its on/off button again. Its display shows bars.
Switching off alarm: Press alarm button. Alarm stops, display may continue flashing until temperature is reached.
Safety lock: Engage by pressing and holding alarm and super freeze buttons for 3 seconds. Indicator light turns on. Deactivate by repeating the process; indicator light turns off.
Switching off for longer periods: Switch off at mains, withdraw plug, clean appliance, leave doors ajar.
Troubleshooting and error codes
| Possible Cause | Remedy |
|---|---|
| Appliance not operating | Appliance is not switched on. See page 13. |
| Interior lighting does not come on | Interior lighting is switched off. See page 4. |
| Appliance is not cold enough | Temperature setting too high. See page 15. Door is not closed properly or is open too often. See page 18. Temperature is being adjusted. See page 16. Dynamic cooling is not switched on. See page 20. |
| Noticeable noise | This is normal. See page 7. |
| Temperature display flashes | Different temperature is being set. See page 16. Temperature in appliance has risen. See page 17. Fresh food is being frozen. See page 19. |
| Alarm sounds | Temperature in freezer is too high or door is open. See page 18. |