Brand: Miele
Category: Oven
Document Type: Manual
Language: EN
Manual for 09 580 050
Uploaded: Nov. 21, 2025, 7:57 p.m.
Warranty Information
Your appliance is guaranteed for 2 years from the date of purchase. Activate your cover online or by phone.
Preparation: Fill the water container with tap water to the "min" marker. Push the water container fully into the appliance. Place food in the oven. Touch the power sensor to switch on.
Setting Temperature and Duration: The display will show "100" and "°C" flashing. Confirm with "OK" for 100 °C or reduce temperature with the "V" sensor. After confirming temperature, "0:00" and "h" will flash. Set desired duration using the "^" (upwards) or "V" (downwards) sensors. Confirm with "OK". The appliance starts automatically.
Important Notes: Only use mains tap water. Do not use distilled or mineral water. Ensure the water container is correctly positioned. If not, F20 will appear. If steps are not completed within 15 minutes, the appliance switches off.
Troubleshooting and error codes
| Problem | Possible cause and remedy |
|---|---|
| F and a number appear in the display. F05 F06 | Technical fault. Switch the appliance off and call the Service Department. |
| F20 | The water container has not been pushed into the appliance properly. Remove the water container and push it back in so that it connects. Switch the appliance off and then back on again. The water container has become harder to put into the appliance and take out again. Lightly lubricate the coupling seal on the water container with silicone grease, as described in "Cleaning and care / Water container / Coupling seal". |