Brand: Miele
Category: Tumble Dryer
Document Type: Manual
Language: EN
Manual for heat pump dryers
Uploaded: Nov. 21, 2025, 7:05 p.m.
1. **Start/Stop button**: Starts or cancels a programme.
2. **Drying level button**: Selects drying level for programmes with this option.
3. **Duration button**: Sets duration for timed programmes.
4. **Delay start button**: Sets a delayed start time.
5. **Option buttons**: Adds various options to programmes.
6. **Programme selector**: Chooses the desired drying programme.
7. **Display**: Shows programme status, time remaining, and sensor information.
8. **Power button**: Switches the dryer on and off.
9. **EcoFeedback sensor**: Provides information on energy consumption.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
| Dryer does not start | Power cord not plugged in. | Plug in the power cord. |
| Fuse has tripped. | Check fuse and reset if necessary. | |
| Door is not closed properly. | Close the door securely. | |
| Laundry is not drying or is taking too long | Fluff filters are blocked. | Clean fluff filters. |
| Incorrect programme selected. | Select the appropriate programme. | |
| Load is too large. | Reduce the load size. | |
| Laundry was not spun sufficiently. | Spin laundry at a higher speed. | |
| Excessive creasing | Load is too large. | Reduce the load size. |
| Laundry has been left in the dryer too long after the programme ended. | Use the Anti-crease function or remove laundry promptly. | |
| Error message on display | Refer to the "Problem solving guide" section for specific error codes and solutions. | Consult the manual for specific error code meanings. |