Manual for T 7744 C

Manual for T 7744 C

Brand: Miele

Category: Tumble Dryer

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 7:48 p.m.

Operating the tumble dryer:

1. Sort the laundry: Separate washed laundry by drying level, fabric type, size, and moisture content. Remove detergent dispensing balls, check seams, fasten closures, and tie strings.

2. Turn on the dryer: Press the I-On/0-Off button.

3. Load the dryer: Open the door using the Door button. Load laundry loosely, do not overload. Ensure the fluff filter is correctly positioned. Shut the door.

4. Select a programme: Choose a programme using the Programme selector. Select the drying level using the Drying level button. For "Cool air" and "Warm air" programmes, set the duration using the Delay start button.

5. Select additional options: Use buttons for Low temperature, Buzzer, or Delay start if needed.

6. Start the programme: Press the Start/Stop button. The "Drying" indicator will light up, and the time remaining will count down.

7. Remove laundry: When the programme finishes (indicated by "0" and "Finish"), press the Door button, open the door, and remove the laundry. Clean fluff filters, close the door, and empty the condensed water container if necessary.

Troubleshooting and error codes

Check and fault messages Possible cause Remedy
Fault message 12 Water tank full or drain hose blocked. Empty water tank or check drain hose.
Fault message 13 Condenser unit blocked. Clean condenser unit.
Fault message 14 Fluff filters blocked. Clean fluff filters.
Fault message 15 Air duct blocked. Clean air duct.
Fault message 16 Fault in the condenser unit. Call Miele Service.
Fault message 23 Water level sensor faulty. Call Miele Service.
Fault message 24 The programme cannot be started. The system lock is activated. Deactivate the system lock.
Privacy Policy