Brand: Miele
Category: Vacuum Cleaner
Document Type: Manual
Language: EN
Manual for HS11
Uploaded: Nov. 21, 2025, 7:07 p.m.
Warranty Information
The appliance is guaranteed for 2 years from the date of purchase.
- Prepare for Use: Attach the suction hose, handle, and telescopic tube. Adjust the telescopic tube to your height. Attach the floorhead, adjusting it for carpets or hard floors. Activate the exhaust filter change indicator if applicable.
- Use: Unwind the mains cable and plug in. Switch on using the foot control. Regulate suction power using the selector or air inlet valve as needed. Pull the cleaner behind you during vacuuming.
- Setting Down, Transportation and Storage: Use the park system for pauses. For storage, switch off, unplug, stand upright, retract tubes, and slot the floorhead into a parking attachment.
- Maintenance: Disconnect power before any maintenance or cleaning. The filtration system includes a dustbag, dust compartment filter, and exhaust filter that need replacement.
Troubleshooting and error codes
| Problem | Possible Cause | Remedy |
|---|---|---|
| The vacuum cleaner switches off automatically. | A temperature limiter switches the vacuum cleaner off automatically if it gets too hot. | Switch the vacuum cleaner off immediately. Disconnect from the electricity supply. After removing the cause, wait for approximately 20 - 30 minutes to allow the vacuum cleaner to cool down. |
| Large articles block the suction tube. | Remove the blockage. | |
| The dustbag is full. | Change the dustbag. | |
| Contains particles of fine dust. | Change the dustbag. | |
| A heavily soiled exhaust or dust compartment filter. | Clean or replace the filter. |