Manual for S 6210 - S 6390

Operating Instructions

Preparing for use:

• Attaching the suction hose: Insert the hose connector into the socket until it clicks into position.
• Removing the suction hose: Press release buttons and lift the hose from the socket.
• Connecting the handle to the suction hose: Insert the suction hose into the handle until it clicks.
• Connecting the handle to the telescopic/triscopic suction tube: Insert the handle into the tube until it clicks.
• Adjusting telescopic/triscopic suction tube: Press release buttons to adjust the tube length.
• Fitting the standard floorhead: Push the suction tube into the floorhead and turn until it clicks.

Correct use:

• Mains cable: Pull out to required length, insert plug. Rewind by pressing foot control after switching off and unplugging.
• Switching on and off: Press the On/Off foot control.
• Adjusting suction power: Turn the rotary selector to the desired setting, indicated by symbols for different floor types and uses.
• Opening the air inlet valve: Open the valve on the handle to reduce suction power temporarily.
• Vacuuming: Pull the cleaner behind you on its wheels.

Setting down, transportation and storage:

• Parking system for pauses: Slot floorhead into the parking attachment at the back.
• Parking system for storage: Stand cleaner upright, retract tube fully, and slot floorhead into side parking attachment.