Manual for Premier 520

Manual for Premier 520

Brand: Miele

Category: Washing Machine

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 6:12 p.m.

Warranty Information

The manufacturer cannot be held liable for damage resulting from incorrect or improper use or operation.

  • Before Use: Ensure correct installation and connection. Run a programme without laundry and detergent to prepare the machine for spinning.
  • Loading: Sort laundry by colour and fabric type. Empty pockets. Pre-treat heavily soiled areas. Do not overload the drum.
  • Programme Selection: Use the programme selector to choose the desired wash programme and temperature. Refer to the programme chart for fabric types.
  • Additional Options: Select additional options like Short, Pre-wash, Soak, or Water plus as needed.
  • Detergent: Use the recommended amount of detergent, adjusting for load size. Use appropriate detergent for coloured fabrics or delicates.
  • Starting the Wash: Press the Start button. The display will show the programme duration.
  • Programme Sequence: Indicator lights show the progress of the wash cycle.
  • At the End of the Programme: Open the door, remove laundry, switch off the machine, and turn the programme selector to Finish.
  • Special Functions: Explore programmable functions like Water plus, Gentle action, Top-up rinse, Memory Function, and Soak to customize wash cycles.

Troubleshooting and error codes

The programme does not start.
Possible Cause Remedy
The appliance is not switched on. Press the I-On/0-Off button.
The door is not closed properly. Close the drum door securely.
The programme selector is not set correctly. Turn the programme selector to the desired programme.
Start has not been pressed. Press the Start button.
Water tap is turned off. Turn on the water tap.
The programme selector is set to "Finish". Turn the programme selector to a programme.
Drain hose is kinked or blocked. Correct the kink or clean the drain hose.
Water inlet hose is kinked or blocked. Correct the kink or clean the water inlet hose.
Water tap is turned off. Turn on the water tap.
Drain pump is blocked. Clean the drain pump filter (see "Cleaning and care").
Power supply faulty. Check fuse/circuit breaker. If faulty, consult a qualified electrician.
The wash programme stops and a fault indicator light comes on
Possible Cause Remedy
Drain pump is blocked. Clean the drain pump filter (see "Cleaning and care").
Drain hose is kinked or blocked. Correct the kink or clean the drain hose.
The machine is not draining properly. Check the machine for blockages. Consult Customer Service if necessary.
Water inlet hose is kinked or blocked. Correct the kink or clean the water inlet hose.
Water tap is turned off. Turn on the water tap.
Water pressure is too low. Check water pressure. If pressure is too low, consult a qualified electrician.
The machine is not filling with water. Check water inlet hose and water tap.
Power supply faulty. Check fuse/circuit breaker. If faulty, consult a qualified electrician.
Door has not been closed properly. Close the drum door securely.
A fault indicator light comes on but the wash programme continues as normal.
Possible Cause Remedy
Too much detergent has been used. Use less detergent.
The water is very soft. Use less detergent.
The load is too small. Use less detergent.
The water is very hard. Use a water softener.
The machine is not draining properly. Clean the drain pump filter (see "Cleaning and care").
The water inlet hose is kinked or blocked. Correct the kink or clean the water inlet hose.
The water tap is turned off. Turn on the water tap.
The drain pump is blocked. Clean the drain pump filter (see "Cleaning and care").
The machine is not filling with water. Check water inlet hose and water tap.
Power supply is faulty. Check fuse/circuit breaker. If faulty, consult a qualified electrician.
The door is not closed properly. Close the drum door securely.
Privacy Policy