Manual for W 502

Manual for W 502

Brand: Miele

Category: Washing Machine

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 6:34 p.m.

Warranty Information

None

Brief instructions

  1. Sort the laundry
  2. Switch on the washing machine
  3. Open the drum door
  4. Load the drum
  5. Close the drum door
  6. Select a programme
  7. Select a spin speed
  8. Select any additional option required
  9. Add detergent
  10. Press the Start button

At the end of a programme:

  1. Open the drum door
  2. Remove the laundry
  3. Switch off the washing machine
  4. Close the drum door

Troubleshooting and error codes

The programme does not start. Check that the machine is plugged in. Check that the stopcock is open. Check that the programme has been selected. Ensure the door is closed securely.
The wash programme stops and a fault indicator light comes on. Check the detergent compartment for blockages. Check the water inlet hose for kinks. Check the drain hose for kinks or blockages. Check the water inlet filters.
A fault indicator light comes on but the wash programme continues as normal.. Check the water inlet filters.
General problems or an unsatisfactory wash result Check that the correct programme has been selected. Check that the correct amount of detergent has been used. Check that the load is not too large or too small. Check that the water hardness has been taken into account.
The drum door cannot be opened by pressing the Door button. Wait until the programme has finished. Ensure that the machine is switched off. Ensure that the water has been drained.
Opening the drum door in the event of a blocked drain outlet and/or power failure See 'Opening the drum door'.
Blocked drain outlet Check the drain filter for blockages. Check the drain hose for kinks or blockages.
Opening the drum door Disconnect the machine from the mains supply. Drain the water out of the machine. Remove the drain filter. Open the drum door.
Privacy Policy