Brand: Mio
Category: Automotive Electronics
Document Type: Installation Guide
Language: EN
Available Languages: EN , ES
Installation Guide for MiVue A20
Uploaded: Aug. 10, 2025, 12:46 a.m.
Warranty Information
Mio provides a 24-month limited warranty for this product.
Connecting to your MiVue
- Ensure the MiVue device is off.
- Connect the MiVue A20 to your MiVue dashcam using the provided cable.
- Connect the other end of the cable to the power adapter.
- Plug the power adapter into your vehicle's cigarette lighter socket.
- Mount the MiVue A20 on your rear windshield using the suction cup mount.
- Adjust the angle of the camera to capture the desired view.
- Ensure the camera is not obstructed by any part of the vehicle.
- Turn on your vehicle's ignition. The MiVue device should power on automatically.
- The MiVue A20 will begin recording when the MiVue dashcam starts recording.
- Check the MiVue device screen to confirm the MiVue A20 is recording.
Troubleshooting and error codes
| Issue | Possible Cause | Solution |
|---|---|---|
| No recording | Camera not connected properly | Check cable connections between MiVue and MiVue A20. |
| Poor video quality | Lens is dirty or obstructed | Clean the lens with a soft cloth. Ensure no obstructions. |
| Device not powering on | No power supply | Ensure the cigarette lighter socket is working and the power adapter is fully inserted. |
| Intermittent recording | Loose cable connection | Ensure all cable connections are secure. |