Manual for CP-C60DW-WE

Manual for CP-C60DW-WE

Brand: MITSUBISHI ELECTRIC

Category: Printer

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 9:12 p.m.

Warranty Information

Refer to the 'Declaration of Conformity' for details regarding EC Directive 1999/5/EC.

Printer Setup Procedure

  1. Install print paper.
  2. Install ink ribbon.
  3. Connect the printer to a personal computer.

Ensure the printing unit is closed after setup.

Common Operations

  • Power: Use the power switch on the side panel.
  • Opening Printing Unit: Press the OPEN button.
  • Paper Installation: Attach paper flanges, feed paper, and close the door.
  • Ink Ribbon Installation: Load ribbon into cassette, then place cassette in the printer.
  • Closing Printing Unit: Push both sides until a click is heard.

Troubleshooting and error codes

ALARM PAPER RIBBON POWER Causes and Countermeasures Page
Steady dot Steady dot Orange circle (Orange) This printer is in standby mode.
Connect a USB cable to the printer when not connected.
It may take time that the printer is ready to print images after the image data is sent.		 6
14
Steady dot Off dot Green circle (Green) The printing unit is open.
Close the printing unit.		 6
Blinking dot Steady dot Green circle (Green) A paper jam or a problem concerning the ink ribbon occurs.
Refer to "Overcoming paper jams."		 16
Steady dot Steady dot Green circle (Green) The temperature of the thermal head is too high or too low.
Wait until the indication goes off. When the indicator stops blinking, the printer resumes printing automatically.
While the printer is working, do not open the door or turn off the power.		 6
Steady dot Blinking dot Green circle (Green) The ink ribbon which is not available to this printer is installed.
Replace the ink ribbon with a new one.
The actual combination of ink ribbon and print paper is inconsistent with the setting made by the personal computer.
Open the printing unit and confirm that the actual combination of ink ribbon and print paper is consistent with the setting made by the personal computer. After checking, close the printing unit.		 11-12
Blinking dot Blinking dot Green circle (Green) The print paper or ink ribbon is not installed.
The print paper or ink ribbon is used up.
Install new print paper or ink ribbon.		 9-12
Blinking dot Off dot Green circle (Green) Other errors 18
Privacy Policy