Brand: Motorola
Category: Audio
Document Type: Quick Start Guide
Language: EN
Quick Start Guide for S10-HD
Uploaded: Nov. 21, 2025, 6:50 p.m.
Warranty Information
Refer to the user manual for specific warranty information.
MOTOROLA S10-HD Quick Start Guide
This guide will help you set up and start using your Motorola S10-HD headphones.
What's in the Box:
- Motorola S10-HD headphones
- USB charging cable
- User Manual
Getting Started:
- Charge your headphones: Connect the USB charging cable to the headphones and a power source. The LED indicator will show charging status.
- Power On/Off: Press and hold the Power button until the LED indicator lights up or turns off.
- Pairing:
- Ensure headphones are powered off.
- Press and hold the Power button until the LED indicator flashes blue and red, indicating pairing mode.
- On your mobile device, turn on Bluetooth and select "S10-HD" from the list of available devices.
- Once paired, the LED indicator will flash blue.
- Using your headphones:
- Play/Pause: Press the Power button.
- Next/Previous Track: Press and hold the Volume Up/Down buttons respectively.
- Volume Up/Down: Press the Volume Up/Down buttons.
- Answer/End Call: Press the Power button.
- Voice Command: Press and hold the Power button for 2 seconds.
LED Indicator Status:
- Solid Blue: Connected
- Flashing Blue and Red: Pairing mode
- Solid Red: Charging
- Off: Powered off
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| Headphones will not turn on | Ensure headphones are charged. |
| Cannot pair with device | Ensure headphones are in pairing mode. Turn Bluetooth on your device off and then on again. Move headphones closer to your device. |
| No sound | Check volume level on both headphones and device. Ensure headphones are connected to the correct device. |
| Poor sound quality | Move headphones closer to the device. Ensure there are no obstructions. |