Brand: Motorola
Category: Computer Hardware
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for VC6000 Series
Uploaded: Nov. 21, 2025, 8:22 p.m.
Manual Publish Date: 2008-12-01
Warranty Information
The VC6000 Series products are warranted against defects in workmanship and materials for one year from the date of shipment.
The VC6000 Series is a rugged vehicle computer designed for harsh mobile environments, enabling real-time data access, collection, and reporting. It features a touch-screen with an integrated QWERTY keyboard, and supports WWAN, WLAN, and Bluetooth connectivity. The device includes an internal GPS receiver for location tracking and is intended for industry and commercial use. Installation requires professional assistance. Basic operations include powering on/off, adjusting screen brightness and keypad illumination, and resuming from standby mode. Resetting the device can be done via warm or cold boot.
Troubleshooting and error codes
| Problem | Cause | Solution |
|---|---|---|
| The VC6000 Series does not power on. | Vehicle ignition key in OFF position. | Switch on the vehicle ignition key to the ON position. |
| SIM door is open. | Close the SIM door properly and secure screw. | |
| Drained vehicle battery. | Charge or replace battery. | |
| Power cable is disconnected. | Connect the Power cable. | |
| Low Battery level warning is issued. | Vehicle battery voltage dropped below 9 V DC. | Start the vehicle engine to charge the battery. Replace battery. |
| LCD and Keypad backlight do not function. | Critical Battery level. Vehicle battery Voltage dropped below 8V. | Start the vehicle engine to charge the battery. Replace battery. |
| Display backlight intensity is reduced. | Display temperature is below 10 °C or above 35 °C (below 50 °F or above 95 °F). | Control the temperature inside the vehicle. |
| The VC6000 Series powers off during operation. | VC6000 Series temperature is out of range: -20 °C to 60 °C (-4 °F to 140 °F). | Control the temperature inside the vehicle. To resume operation, momentarily press the Power Button. |