Getting started

Location

Do not place your CT50 in the bathroom or other humid areas. You need to place your CT50 base within 2 metres of the telephone wall socket so that the cable will reach. The socket-outlet should be installed near the equipment and should be easily accessible.

• Connecting the handset: Plug one end of the curly line cord into the socket on the handset and the other end into the telephone wall socket.

Getting to know your phone

Overview of the handset

• A Earpiece
• B Hook switch: Hangs up a call when pressed or when you replace the handset.
• C Redial: Press to redial the last number called.
• D *: Dial a *.
• E R: Recall used with switchboards / PABX.
• F Microphone
• G Mute: Speak to someone nearby without your caller hearing the conversation. Lights up when mute is activated.
• H #: Dial a #.
• I Memory: For storing and dialling numbers in the two-touch memory.
• J Curly line cord socket
• K Ringer switch: Switch the ringer volume between high, low and off.
• L Ring indicator LED: Flashes to indicate an incoming call.

Wall mounting

Important

Before you wall-mount your CT50, check that you are not drilling into any hidden wiring or pipes. Before you drill, make sure the telephone line cable will reach the socket.

1. Drill two 4mm diameter holes in the wall 10 or 7.2 cm apart vertically.