Brand: NEC
Category: Cordless Telephone
Document Type: Installation Guide
Language: EN
Installation Guide for DS1000/2000 900 MHz Cordless Telephone
Uploaded: Nov. 21, 2025, 7:31 p.m.
Manual Publish Date: 2004-03-10
Warranty Information
This manual does not contain warranty information.
Answering Calls: Outside calls ring with 2 short rings followed by a long ring. Intercom calls ring with 1 long ring. Press TALK or the flashing line key to answer. Lifting the handset from the charger also answers.
Placing Calls: For intercom, press TALK + Dial extension or *8 for Voice Mail. For outside calls, press TALK + Dial trunk access code + outside number, or press line key + Dial outside number.
Hanging Up: Press TALK or place handset in charger.
Changing Channels: If multiple units are present, press CH on handset to change channels to minimize interference. 30 channels available.
Placing Calls: For intercom, press TALK + Dial extension or *8 for Voice Mail. For outside calls, press TALK + Dial trunk access code + outside number, or press line key + Dial outside number.
Hanging Up: Press TALK or place handset in charger.
Changing Channels: If multiple units are present, press CH on handset to change channels to minimize interference. 30 channels available.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Power LED is off | Base power supply not properly connected | Check base power supply connection. |
| Desk LED is flashing | Base not correctly connected to digital station circuit | Check base connection to digital station circuit. |