Manual for INT-1018

Name: Manual for INT-1018
Brand: NEC
Availability: InStock

Brand: NEC

Category: Cordless Telephone

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 6:35 p.m.

Manual Publish Date: 2004

Warranty Information

This manual does not contain specific warranty information.

Basic Operation:

Making Calls: Dial the number using the numeric keypad or use speed dial.
Answering Calls: Press the TALK key when the handset rings.
Ending Calls: Press the TALK key or place the handset on the base/charging unit.
Conference Calls: Set up a 3-party conference by dialing numbers and using the CONF key.
Features: Utilize Hold, Transfer, Mute, and programmable keys for advanced functions.
Volume Control: Adjust ringer and handset volume using the Ring/Vol key.

Problem	Suggestion
CHARGE light will not come on when the handset is placed in the charging unit.	Make sure the AC adapter is plugged into the charging unit and wall outlet. Make sure the handset is properly seated in the charging unit. Make sure the NiMH battery pack is properly installed in the handset. Make sure that the charging contacts on the handset and charging unit are clean.
Conversation is interrupted frequently.	Make sure the base unit antenna is fully vertical. Move closer to the base unit. Check for low batt warning. Move closer to the base unit.
Warning tone and NO SERVICE message	Move closer to the base unit.
Handset does not ring	The NiMH battery may be weak. Charge the battery pack for eight hours. Make sure the base unit antenna is fully vertical. The handset may be too far from the base unit.