Parts/Service for FP1370

Parts/Service for FP1370

Brand: NEC

Category: Monitor

Document Type: Parts/Service

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 8:43 p.m.

Warranty Information

No warranty information is provided in the extracted pages.

Operating Precautions

  • Only qualified service personnel should attempt to service this equipment.
  • Always use manufacturer-specified replacement parts.
  • Be aware of high voltage present within the unit, especially around the CRT.
  • Follow all safety procedures, including grounding and proper power connections.
  • Handle the CRT with care to avoid breakage and potential injury.
  • Discharge CRT anode potential before removing the Anode Cap.
  • Use appropriate tools, such as screwdrivers that fit screws, to avoid damage.
  • Ensure proper lead dress in high voltage circuit areas.
  • Shatter-proof goggles are recommended when handling the picture tube.

Basic Controls

  • Brightness/Contrast: Adjust overall screen brightness and the relationship between image and background.
  • Degauss: Eliminates magnetic field buildup that affects color purity, focus, and convergence. Allow 20 minutes between uses.
  • Size and Position Controls: Adjust horizontal and vertical size, position, and balance. 'Auto Adjust' optimizes settings for applicable signal timings.
  • Color Control: Select preset color settings or adjust Red, Green, and Blue individually using AccuColor® Control System.
  • Geometry Controls: Adjust curvature, tilt, alignment, and rotation of the display sides.

Troubleshooting and error codes

ProblemPossible CauseSolution
No Picture Power cord disconnected. Connect power cord.
Monitor power switch is OFF. Turn on monitor power switch.
Computer video output is OFF. Turn on computer video output.
Input signal cable is loose or disconnected. Check cable connections.
Incorrect input signal selected. Select correct input signal.
Monitor is in Power Save Mode. Move mouse or press a key on the computer keyboard.
Image Distortion Signal cable is loose or damaged. Check signal cable.
Magnetic interference. Move monitor away from magnetic sources. Use Degauss.
Incorrect resolution or refresh rate. Adjust computer's display settings.
Flickering Image Incorrect refresh rate. Adjust computer's display settings.
Magnetic interference. Move monitor away from magnetic sources. Use Degauss.
Color Issues Signal cable is loose or damaged. Check signal cable.
Incorrect color settings. Adjust color settings via OSM.
Magnetic interference. Move monitor away from magnetic sources. Use Degauss.
Privacy Policy