Manual for LCD22WMGX

Power Switch

Turns on or off the main power.

Power LED

LED Blue - Power is ON. LED Amber - Monitor is in "Power Saving Mode". LED is off - Power is OFF.

Quick Start

To attach the Base to the LCD Stand: Insert the front of the LCD stand into the holes in the front of the Base. Attach the Base to the Stand. The locking tab on the Base should fit into the hole on the back of the Stand. To attach the LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. Connect the DVI signal cable or 15-pin mini D-SUB signal cable to the display card in your system. 3. Connect one end of the power cord to the monitor and the other end to the power outlet. 4. Attach the Cable Holder on to the Base.

Tilt

Grasp both sides of the monitor screen with your hands and adjust the tilt as desired.

Remove Monitor Stand for Mounting

1. Disconnect all cables. 2. Place monitor face down on a non-abrasive surface. 3. Remove the 3 screws connecting the monitor to the stand and remove the stand. 4. Connect the AC cord to the back of the monitor. 5. Reverse this process to re-attach stand.

Removing the Base

1. Place monitor face down on a non-abrasive surface. 2. Press the bottom tabs upward to unlock. 3. Press the top tabs down to unlock and pull off the stand.