Manual for MB

1. Checking Included Accessories

• Open the box and verify all items and accessories are present.
• Contact the place of purchase if any items are missing or damaged.
• Confirm the model and serial number on the base unit match the warranty.

2. Connecting Included Accessories

• Avoid touching connector terminals to prevent damage.
• Connect the LAN cable only after Windows setup and firewall configuration.
• Connecting power sources:
• Attach stabilizers if the computer is stood vertically.
• Connect keyboard to the purple keyboard port and mouse to a USB port.
• Connecting the display:
• Use either a digital or analog connector.
• Connect the power cord and ground wire to an AC wall outlet.

3. Windows Setup

• Turn on the display and press the power switch.
• Do not turn off power during setup.
• Follow on-screen prompts to set country, time, keyboard layout, user name, computer name, and license terms.
• Enter a password when prompted.
• Select settings for Windows protection and review time/date settings.
• Click OK to shut down the computer.

4. Knowing the Parts

• Illustrations of the front and back of the computer are provided, with numbered components.
• A detailed explanation of each numbered component is given, including optical drive, power switch, LEDs, ports (USB, PS/2, Serial, Analog RGB, Line In, Mic, Headphone), air vent, cable stopper, slide stopper, LAN port, and chassis lock.

5. Mouse

• A USB mouse is included.
• The mouse sensor may not function properly on reflective, patterned, striped, or shiny surfaces.
• Using the scroll wheel:
• Vertical scrolling by rotating the wheel.
• Auto scrolling by clicking or holding the wheel.

6. LAN Function

• Settings for network connection and computer name can be changed via Control Panel.
• Remote power on (WoL - Wake on LAN):
• Allows remote power on/wake up from sleep or hibernate mode.
• Requires special software on the administrator's PC.
• WoL requires a hub supporting 10M/100M/1000M Auto-negotiation.
• Configuration involves BIOS setup to enable WoL from power off or sleep/hibernate.

7. Opening and Closing Covers

• Instructions for removing and replacing the roof cover are provided.
• Caution regarding hot surfaces and the use of stabilizers.

8. Memory

• Maximum 8 GB RAM supported across four slots.
• Memory cards are installed in a specific order (DIMM_A2, DIMM_B2, DIMM_A1, DIMM_B1).
• For dual-channel memory, install pairs of the same capacity.

9. PCI board/PCI Express x1 board

• Notes on board sizes and installation precautions regarding static electricity.
• Steps for installing a PCI or PCI Express x1 board.

10. System Configuration

• Instructions for entering and operating the BIOS setup utility.
• Steps to restore default factory settings.

11. Security Chip Function

• Enabled only for specific models (MG32M/B-F, MG33L/B-F).
• Does not guarantee complete data protection.
• Procedures for initializing and enabling the security chip.
• Recommends setting supervisor/user passwords for enhanced security.

12. Applications

• Microsoft® Office trial:
• May not be pre-installed on Japanese versions.
• Requires purchase of a product key.
• Not installed after recovery.
• Deleting Data from the Hard Disk:
• Recovery Disc not included for specific models.
• Data can be deleted via Recycle Bin, formatting, or specific deletion modes (Simple, NSA, DoD).
• Reset BIOS settings before deleting data.

13. Recovery

• Recovery Basics:
• Required materials: Recovery Disc (not included for specific models).
• Backup data before recovery.
• System settings will reset to factory defaults after recovery.
• Return BIOS Utility settings to original values before recovery.
• Precautions during Recovery:
• Follow manual and on-screen instructions.
• Disconnect peripheral devices.
• Do not interrupt recovery.
• Computer recovery options: Hard Disk Recovery or DVD Recovery.
• Detailed steps for both recovery methods.

14. Appendix

• Specifications: Details model names, CPU, memory, power, dimensions, and weight.

Precautions

• Unauthorized copying is prohibited.
• Contents may change without notice.
• Errors, queries, or omissions should be reported.
• No liability for damages resulting from use.
• Equipment not intended for high-reliability uses (medical, nuclear, etc.).
• Windows OS and included media are for this product only.
• Software distribution without permission is copyright infringement.
• Hardware maintenance information is saved.
• Some software may not pass the "Designed for Windows®" program test.
• Content created at the time of product creation; contact information may change.