Brand: NEC
Category: Printer
Document Type: Manual
Language: EN
Manual for 870
Uploaded: Nov. 21, 2025, 8:55 p.m.
Manual Publish Date: 1998-04-01
Warranty Information
Refer to the SuperScript 870 Printer Limited Warranty for details.
Setting Up the Printer
This chapter provides essential information for setting up your NEC SuperScript 870 printer. Key steps include:
- Selecting an appropriate location considering space, electrical, and environmental factors.
- Understanding printer dimensions and identifying all parts.
- Ensuring system and printer requirements are met.
- Unpacking the printer and its components carefully.
- Installing the multi-purpose tray and loading paper.
- Turning the printer ON and testing its functionality with a test page.
- Connecting the printer to your computer using the interface cable.
- Installing the face-up output tray.
- Reviewing printer safety guidelines.
- Ordering necessary supplies and accessories.
Follow these steps to ensure a smooth setup and begin printing.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Paper Jam | Incorrect paper loading, too much paper, wrong paper type. | Clear jam following instructions, ensure proper loading, check paper type. |
| Poor Print Quality (Smudged, Light, Streaked) | Toner issues, dirty rollers, incorrect settings. | Redistribute toner, clean printer interior, check print settings, consider replacing toner module. |
| Printer Not Responding | Connection issues, printer off, software problems. | Check cable connections, ensure printer is ON, restart computer and printer, reinstall driver. |
| Error Lights On | Specific error indicated by light pattern. | Consult Operator Panel and Status Monitor for error code and resolution. |