Manual for Nikkorex-8

Film Loading: Ensure subdued light. Lift and turn the camera cover lock, then remove the cover. Place the camera on a flat surface, exposed compartment up. Remove the empty spool, swing aside the film counter lever. Remove the seal from a new roll, unroll about 5", making a loop. Insert film end into spool slot, wind two turns. Place spools into camera, advance film by pressing the release button for 2-3 seconds. Replace and lock the camera cover.Film Speed Setting: Set the ASA dial to the film's rating.Automatic Exposure: Turn the exposure control knob to 'A'. The camera automatically adjusts the lens diaphragm.Manual Exposure: Turn the exposure control knob to 'M' and set the meter needle to the desired F-number.Film Running: Depress the film release button to start the motor and film.Running Lock: For continuous filming, pull the release button to the 'bottom' position. Press again to stop.Locking Exposure Control: Set the knob to 'C' when not in use to protect aperture blades.