Brand: Panasonic
Category: Air Conditioner
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for CS-C7CKP
Uploaded: Nov. 21, 2025, 8:22 p.m.
Warranty Information
Please consult the dealer for warranty information.
Starting Operation: Press the power button (1). The POWER indicator on the indoor unit will light up. To stop, press it again.
Setting the Mode: Press button (2) to select your desired mode: AUTO (Automatic Operation), COOL (Cooling Operation), DRY (Soft Dry Operation), or FAN (Air Circulation Operation).
Setting Temperature: Press button (3) to increase or decrease the temperature. The range is 16°C to 30°C. For AUTO operation, button (3) can adjust the temperature by 2°C higher, standard, or 2°C lower than the ambient temperature.
Fan Speed: Press button (4) to select fan speed: Low, Medium, High, or Auto.
Vertical Airflow Direction: Press buttons (5) or (6) to adjust the vertical airflow direction automatically (AUTO) or manually through five stages.
Horizontal Airflow Direction: Adjust manually.
Troubleshooting and error codes
| Normal Operation | This is the answer |
|---|---|
| Air conditioner has been restarted, but does not operate for 3 minutes. | This is to protect the air conditioner. Wait until the air conditioner begins to operate. |
| A sound like water flowing can be heard. | This is the sound of refrigerant flowing inside the air conditioner. |
| It seems that fog is coming out from the air conditioner. | Condensation occurs when the airflow from the air conditioner cools the room. |
| The room has a peculiar odour. | This may be a damp smell emitted by the wall, carpet, furniture or clothing in the room. |
| During Automatic Vertical Airflow setting, indoor fan stops occasionally. | This is to remove smell emitted by the surroundings. |
| The outdoor unit emits water or steam. | In COOL/DRY operation, moisture in the air condenses into water on the cool surface of outdoor unit piping that causes dripping. |
| (For Heat Pump Model only) Operation stops for about 12 minutes during heating (The power indicator blinks). | This is to melt the frost which has accumulated on the outdoor unit (defrosting operating). This will take no longer than about 12 minutes. Water drips from the outdoor unit. Wait until this operation ends. (the power indicator will light up). (Frost will accumulates on the outdoor unit when the outdoor temperature is low and humidity is high.) |
| (For Heat Pump Model only) During heating operation, indoor fan may run at on and off conditions. | This is to prevent undesired cooling effect during heating operation. |