Manual for HC-V210

Manual for HC-V210

Brand: Panasonic

Category: Camcorder

Document Type: Manual

Language: EN

Uploaded: Aug. 10, 2025, 12:43 a.m.

Basic Camera Positioning

1. Hold the unit with both hands, placing your hand through the grip belt. Ensure stable footing and avoid collisions. Keep arms close to your body for balance. Do not cover microphones.

2. For outdoor recording, position the sun behind you to avoid backlit subjects.

Basic Motion Picture Recording

Hold the unit steady. Move slowly and at a constant speed when recording. Use zoom judiciously to avoid jerky footage.

Recording Yourself

Rotate the LCD monitor towards the lens. The image will be horizontally flipped (mirror image). Note that only some indications appear on screen.

Troubleshooting and error codes

Problem Check points
The remaining time indication or the elapsed time indication is not shown. [DISPLAY] of the [SETUP] is [OFF]. (→ 32)
The unit arbitrarily stops recording.
  • Use an SD card that can be used for motion picture recording. (→ 16)
  • The recordable time may have shortened due to deterioration of data writing speed or repeated recording and deletion. Using the unit, format the SD card or built-in memory. (38)
  • If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF]. (→ 50)
Auto Focus function does not work.
  • Switch to Intelligent Auto Mode.
  • If you are trying to record a scene that is hard to bring into focus in Auto Focus Mode, use the Manual Focus Mode to adjust the focus. (→ 27, 56)
"ENVIRONMENT TOO DARK, OR LENS COVER CLOSED." is displayed.
  • Before turning on the unit, open the lens cover.
  • This message may also be displayed when recording in a very dark location.
Color balance of images is strange when recording in a place such as a gymnasium. In a place with multiple light sources, such as a gymnasium or a hall, set the White Balance setting to (Indoor mode 2). If you cannot record clearly with the (Indoor mode 2), set it to (Manual adjustment mode). (54)
Color or brightness of the image changes, or you may see horizontal bars in the image. Color or brightness of the image may change, or you may see horizontal bars in the image when the object is recorded under fluorescent light, mercury light or sodium light, etc., but this is not a malfunction.
The LCD monitor flickers indoors. Record in Intelligent Auto Mode or set the shutter speed to 1/60 in areas where the power supply frequency is 60 Hz, or 1/100 in areas of 50 Hz.
Privacy Policy