Brand: Panasonic
Category: Camcorder
Document Type: Manual
Language: EN
Available Languages: EN , ES
Brand: Panasonic
Category: Camcorder
Document Type: Manual
Language: EN
Available Languages: EN , ES
Uploaded: Nov. 21, 2025, 6:12 p.m.
| Symptom | Cause | Action | Page |
| Movie Camera does not turn on. | Battery Pack is not attached. | • Attach it correctly. | 12 |
| Battery Pack is not charged. | • Charge it. | 8 | |
| AC Adaptor is not connected. | •Connect the AC Adaptor correctly to the Movie Camera. | 38 | |
| Movie Camera turns off soon. | Battery Pack is exhausted. | • Use a fully charged one. | 8 |
| Shooting was paused for more than 6 minutes. | •Turn in the [OPERATE] Switch to turn off the Movie Camera, and then turn it out again. | 20 | |
| Condensation has formed inside. | •Wait several hours. | 68 | |
| Shooting | •No picture appears in the Viewfinder. | [OPERATE] Switch is turned in. | • Turn it out. |
| Lens Cap is on the Lens. | •Remove it. | ||
| The Viewfinder is not extended. | • Extend it. | ||
| Indications in the Viewfinder are not clear. | Eyepiece Corrector is not adjusted. | • Adjust it. | 18 |
| Lens is covered with dust or dirt. | •Clean it. | ||
| •Shooting cannot be started. | Tab of the inserted cassette is broken out. | •Cover the tab hole with adhesive tape. | 34 |
| No cassette is inserted. | Insert a cassette with intact erasure prevention tab. | 16 | |
| Tape has reached its end. | • insert a new video cassette. | 16 | |
| •Date and time cannot be recorded. | Date and time are not set. | Set the date and time. | 44 |
| •Date and time are not displayed in the Viewfinder. | • [DATE/TIME] Button was not pressed. | •Press the [DATE/TIME] Button. | |
| Built-in Lithium Battery is exhausted. | • Recharge the built-in Lithium Battery. | ||
| Playback | •No playback picture is reproduced. | •[OPERATE] Switch is turned in. | •Turn it out and press the [VTR/CAMERA] Button so that the "VTR" Indication Lamp lights up. |
| Movie Camera is not connected to the TV set or it is connected incorrectly. | •Connect Movie Camera to the TV set correctly. | ||
| •Picture is not in colour. | •Wrong channel is selected on the TV set. | •Select the correct channel. | — |
| •Picture is not in colour or distorted. | •Colour adjustment on the TV set is not made properly. | •Adjust colour control on the TV set. | — |
| •Picture contains noise bars. | •Tracking is not adjusted. | •Adjust the tracking on the Movie Camera. | 30 |
| Cue, Review or Still Playback is being performed. | •This is not a malfunction. |