Manual for PV-DV351/PV-DV701

Manual for PV-DV351/PV-DV701

Brand: Panasonic

Category: Camcorder

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Aug. 10, 2025, 12:41 a.m.

Warranty Information

Panasonic offers a one-year limited warranty on camcorders, with exceptions for the CCD image sensor.

  • To begin, ensure the Palmcorder is connected to a power source and the battery is charged.
  • Insert a cassette tape with the record tab closed.
  • Power on the device by setting the POWER switch to CAMERA or VCR.
  • For recording, use the EVF or LCD monitor to frame your shot, adjust vision, and press REC/PAUSE to start.
  • For playback, set the POWER switch to VCR, insert a cassette, and use the LCD monitor to select and play recordings.
  • The manual also details inserting memory cards, using the built-in light, attaching accessories, and navigating menus.

Troubleshooting and error codes

Symptom Correction
No picture in the EVF or LCD Monitor...
  • Make sure the Power Source is connected. (pp. 11, 12)
  • Make sure the POWER switch is set to VCR or CAMERA. (pp. 22, 27)
  • Check the Dew Indicator. (p. 21)
  • Make sure the Battery is fully charged. (p. 11)
  • Make sure all necessary cables are connected correctly and firmly. (p. 12)
  • Make sure the Lens Cap is removed. (p. 22)
Video cassette cannot be inserted...
  • Make sure the Power Source is connected. (pp. 11, 12)
  • Insert the cassette record tab up, window side facing out. (p. 9)
Video cassette cannot be removed...
  • Make sure the Power source is connected. (pp. 11, 12)
No operation starts when operation buttons are pressed...
  • Check the Dew Indicator. (p. 21)
Recording cannot be done...
  • Make sure the record tab is closed. (p. 6)
  • Check the Battery Indication. (p. 19)
Auto Focus does not operate...
  • Make sure FOCUS is set to AUTO. (p. 47)
  • Make sure the unit is ON and set to CAMERA mode. (p. 22)
Sound from microphone cannot be monitored...
  • Make sure the unit is set to REC or REC/ PAUSE mode.
Sound cannot be heard...
  • Make sure the Audio on the VCR MENU is set to ST1. (pp. 17, 51)
Privacy Policy