Manual for PV-L558

Manual for PV-L558

Brand: Panasonic

Category: Camcorder

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Aug. 10, 2025, 12:39 a.m.

Manual Publish Date: 1998-01-01

Warranty Information

The product is covered by a one-year limited warranty for parts and 90 days for labor.

Camera Recording

  1. Attach a fully charged Battery.
  2. Slide the TAPE EJECT switch to open door.
  3. Insert cassette.
  4. Press here to close door.
  5. Set POWER switch to CAMERA.
  6. Slide TAPE SPEED Selector to SP or SLP.
  7. Adjust Vision Adjustment Control to your eyesight.
  8. Press RECORD/PAUSE to start recording.

To Watch Playback in the EVF

  1. Set the POWER switch to VCR.
  2. Press the REWIND/SEARCH to rewind tape.
  3. Press PLAY to start playback.
  4. Press STOP to stop playback.

Troubleshooting and error codes

Symptom Correction
No picture in the EVF
  • Make sure a Power Source is connected.
  • Make sure the POWER switch is set to VCR or CAMERA.
  • Check the Dew Indicator.
  • Make sure the battery is fully charged.
  • Make sure all necessary cables are connected correctly and firmly.
Video cassette cannot be inserted
  • Make sure a Power Source is connected.
  • Insert the cassette with the window side facing out.
Video cassette cannot be removed
  • Make sure a Power Source is connected.
  • Check for the Dew Indicator.
No operation starts when operation buttons are pressed
  • Make sure the record tab is still intact.
  • Check the Battery Indicator.
  • Check the Dew Indicator.
Recording cannot be done
  • Make sure the record tab is still intact.
  • Check the Battery Indicator.
  • Check the Dew Indicator.
Auto Focus does not operate
  • Make sure the FOCUS button is set to AUTO.
  • Make sure the unit is ON, with the POWER switch set to CAMERA.
Sound from microphone cannot be monitored
  • Make sure the unit is set to REC or Record/Pause mode.
Camera picture is too dark
  • Make sure the HIGH SPEED SHUTTER button is OFF.
No playback picture, or the playback picture is noisy or contains streaks
  • Press UP ▲/DOWN▼ button during playback (Tracking Control).
During playback, the picture shows motion or blurred action
  • Portions of the still picture where the normal speed motion was particularly rapid may produce this effect. This is normal.
The playback picture is fast and there is no sound
  • Make sure the TIME LAPSE feature is set to OFF in the Menu mode.
"Panasonic IT'S VHS! SO ITS TAPES PLAY IN YOUR VCR ..." appears in the EVF and Monitor
  • Set the POWER switch to CAMERA, and then hold down STOP for 5 seconds (approx.) to exit the Demo mode.
If the top of your playback picture waves back and forth excessively
  • Because the playback signal is not as stable as an off the air TV signal, the top of your TV screen may be bent or unstable when the tape is played back. To solve this problem, locate the horizontal hold control on your TV. Turn it slowly to correct the wavy picture. If your TV does not have a horizontal hold control or adjusting the control does not help, some modifications may have to be made to the TV set.
Privacy Policy