Quick Start Guide for KX-TGD560

Quick Start Guide for KX-TGD560

Brand: Panasonic

Category: Cordless Phone

Document Type: Quick Start Guide

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 7:13 p.m.

Manual Publish Date: 2017-06-01

Warranty Information

No warranty information provided in this document.

Connections

Base unit

  1. Connect the AC adaptor to the unit by pressing the plug firmly.
  2. Connect the AC adaptor to the power outlet.
  3. Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click.
  4. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service.

Note: Use only the supplied Panasonic AC adaptor PNLV226.

Charger

  1. Connect the AC adaptor to the power outlet.

Battery installation/Battery charging

Charge for about 7 hours.

Note:

  • USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
  • Do NOT use alkaline/manganese/Ni-Cd batteries.
  • Confirm correct polarities.
  • Follow the directions on the display to set up the unit.
  • Confirm "Charging" is displayed.

Operating tips

Soft keys

By pressing a soft key, you can select the feature shown directly above it on the display. Pay attention to the display to see what functions the soft keys are assigned during operation.

Navigator key

  • [<], [>], [ ▲], or [ ▼]: Scroll through various lists and items.
  • VOL. (Volume: [ ▲] or [ ▼]): Adjust the receiver or speaker volume while talking.
  • [  ]: View the phonebook entry.
  • [ >] REDIAL: View the redial list.
  • [  ] CID (Caller ID): View the caller list.

Troubleshooting and error codes

Question Cause/solution
Why is ▵ displayed?
  • The handset is too far from the base unit. Move closer.
  • The base unit's AC adaptor is not properly connected. Reconnect AC adaptor to the base unit.
  • The handset is not registered to the base unit. Register it.
    1. Handset: [MENU] #130
    2. Base unit: Press and hold [LOCATOR] for about 5 seconds.
    3. Handset: Press [OK], then wait until a long beep sounds.
Why am I unable to pair a cellular phone to the base unit?
  • Depending on the compatibility of the cellular phone, you may not be able to pair it to the base unit. For more information, please visit: http://shop.panasonic.com/bluetooth-phone
  • Confirm that the Bluetooth feature of your cellular phone is turned on. You may need to turn this feature on depending on your cellular phone.
  • The cellular phone has not been paired to the base unit. Pair the cellular phone.
Why is there no dial tone? (cellular line)
  • Press the volume key [ ▲] repeatedly while talking.
How can I increase the handset volume level?
  • Press the volume key [ ▲] repeatedly while talking.
Why is the conversation noisy or cutting off?
  • Try to relocate the base unit so that distance to the handset is minimized.
  • If the same problem occurs even if the handset is next to the base unit, please visit: http://shop.panasonic.com/support
Can I add another accessory handset to my base unit?
  • Yes, you can add up to 6 handsets (including the handset(s) sold with your base unit) to a single base unit.
  • To purchase additional accessory handset(s) (KX-TGDA50/ KX-TGDA51), please visit: http://shop.panasonic.com/support
  • TTY users (hearing or speech impaired users) can call 1-877-833-8855.
Can I keep the batteries charging all the time?
  • You can leave the handset on the base unit or charger anytime. This will not harm the batteries.
How can I answer a call waiting call (2nd call)?
  • Press [FLASH] when you hear the call waiting tone.
Privacy Policy