Manual for KX-TGF773

Manual for KX-TGF773

Brand: Panasonic

Category: Cordless Phone

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 6:10 p.m.

Manual Publish Date: 2018-09-27

Warranty Information

This is a limited warranty for Panasonic products purchased and serviced in the USA, covering defects for one year for parts and labor.

Basic Operation

Making and Answering Calls

  • Handset: Press TALK to make landline calls. To make cellular calls, press TALK or use CELL 1/CELL 2. Press TALK or SP-PHONE to answer calls.
  • Base Unit: Press SP-PHONE to make landline calls. To make cellular calls, press CELL 1 or CELL 2. Press SP-PHONE to answer calls.

Answering System

  • To turn on/off, press ANSWER ON/OFF on the base unit.
  • Listen to messages by pressing PLAY on the base unit.

Link to Cell

  • Pair your cellular phone to the base unit to make/answer cellular calls using your phone system.
  • Follow on-screen prompts for pairing.

Other Features

  • Access Phonebook, Redial, and Caller ID via soft keys and navigator keys.
  • Program settings like language, date/time, and dial mode through the MENU.

Troubleshooting and error codes

Problem Cause/solution
Liquid or other form of moisture has entered the handset/base unit. Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center.
Caution: • To avoid permanent damage, do not use a microwave oven to speed up the drying process.
I cannot remember the PIN.
  • Change the PIN using the following method.
  • Handset:
  • 1 【MENU】#619
  • 2 *7000
  • 3 Enter the new 4-digit PIN. → 【OK】
  • 4 Enter the new 4-digit PIN again. → 【SAVE】 → 【OFF】
"Voicemail msg. via phone co." is shown on the handset display. or "Voicemail msg." is shown on the base unit display. How do I remove this message from the display? This notification is displayed when your phone service provider's voicemail service (not the unit's answering system) has recorded a message for you. Typically you can remove this notification from the display by listening to the message. To listen to the message, dial the voicemail number provided by your phone service provider (for most cases, this will be your own phone number), and follow the voice instructions. Depending on your phone service provider, you may need to remove all messages from your voice mailbox to remove the notification. You can also remove this notification by pressing and holding # until the unit beeps.
Privacy Policy