Brand: Panasonic
Category: Digital Camera
Document Type: Manual
Language: EN
Manual for DC-FZ82
Uploaded: Nov. 21, 2025, 6:28 p.m.
- Camera Handling: Keep away from vibration, force, and pressure. Avoid dust, sand, and water. Allow camera to adjust to temperature to clear condensation.
- Accessories: Ensure all supplied accessories are present. Optional cards (SD, SDHC, SDXC) are required for operation.
- Battery and Charging: Charge battery before first use. Store battery in a cool, dry place. Use only genuine Panasonic batteries and chargers.
- Initial Setup: Turn the camera on and set the clock and home area.
- Basic Operations: Use the zoom lever to adjust magnification. Press the shutter button halfway to focus and fully to take a picture. Select recording modes using the mode dial.
- Focus Modes: Switch between AF, AF Macro, and MF using the [AF/AF/MF] button.
- Monitor/Viewfinder: Switch between the viewfinder and monitor using the [LVF] button. Adjust diopter for clear view.
- Rear Dial & Cursor Button: Use for selecting items, setting values, and adjusting exposure, ISO, White Balance, Drive Mode, and AF Mode.
Troubleshooting and error codes
| Issue | Possible Cause | Solution |
|---|---|---|
| The charging lamp blinks. | Charging in extreme temperatures. | Reconnect USB cable and charge in a location with ambient temperature between 10 °C and 30 °C (50 °F to 86 °F). |
| Low power supply capacity of the computer. | Ensure the computer has sufficient power. | |
| The battery runs down quickly. | [4K PHOTO] is set to [4K Pre-Burst]. | Select [4K Pre-Burst] only when recording. |
| Focus not aligned correctly. | Subject outside of focus range. | Adjust focus range settings. |
| [Focus/Release Priority] is set to [RELEASE]. | Set to [FOCUS]. | |
| [Shutter AF] is set to [OFF]. | Set to [ON]. | |
| AF Lock is set inappropriately. | Reset AF Lock. | |
| Fingerprints or dirt on the lens. | Clean the lens. | |
| Subject appears skewed in pictures. | Characteristic of MOS sensors. | This is a characteristic of MOS sensors and not a malfunction. |
| Striping or flicker may appear under lighting such as fluorescent lighting and LED lighting fixture. | Characteristic of MOS sensors. | This is a characteristic of MOS sensors and not a malfunction. May be reduced by setting a slower shutter speed or using [Fikr Decrease]. |
| 4K photo recording stops before finishing. | High ambient temperature or continuous recording. | Wait until the camera cools down. |
| Cannot record motion pictures. | Large capacity card used. | May take a while after turning on the camera. |
| Sometimes focus adjustment with auto focus mode is difficult while recording 4K motion pictures. | Auto focus speed reduced for high precision focus. | This is not a malfunction. |
| No flash emitted. | Flash is closed. | Open the flash. |
| [Shutter Type] is set to [AUTO] or [MSHTR]. | Adjust [Shutter Type] setting. | |
| [Silent Mode] is set to [OFF]. | Set [Silent Mode] to [ON]. | |
| It cannot connect to the wireless LAN. Radio waves get disconnected. | Outside communication range or interference. | Use within range, away from interfering devices (microwave ovens, cordless phones). |
| Battery indicator flashing red. | Ensure sufficient battery charge. | |
| Camera placed on metal surface. | Use camera away from metal surfaces. | |
| The lens makes a clicking noise. | Normal operation of lens movement or aperture adjustment. | This is not a malfunction. |
| Zooming stops instantaneously. | Using Extra Optical Zoom. | The zooming action will stop temporarily. This is not a malfunction. |