Brand: Panasonic
Category: Digital Camera
Document Type:
Language: EN
Manual for DC-ZS200
Uploaded: Aug. 9, 2025, 11:35 p.m.
Camera Handling: Avoid extreme conditions that could damage the lens, monitor, or body. The camera is not dust, splash, or waterproof.
Condensation: If condensation occurs due to temperature changes, turn off the camera and wait for it to clear.
Test Shots: Always take test shots before important events.
Copyright: Observe copyright laws for unauthorized use of recordings.
Accessories: Ensure all specified accessories are supplied. Optional accessories are available.
Battery Charging: Use only the dedicated AC adaptor and USB cable. Charge the battery before first use.
Battery Insertion/Removal: Follow specific steps for inserting and removing the battery, using the release lever.
Charging Lamp: Indicates charging status (On: progress, Off: complete, Flashing: error).
Troubleshooting and error codes
| Issue | Possible Cause | Solution |
|---|---|---|
| Monitor/viewfinder is turned off | [Auto LVF/Monitor Off] activated or eye sensor obstructed | Adjust [Auto LVF/Monitor Off] setting or ensure eye sensor is clear. |
| Monitor flickers or brightness changes | Aperture change or subject brightness variation | This is not a malfunction. |
| Cannot switch between monitor and viewfinder | Connected to computer/printer | When connected, images are displayed on the monitor only. |
| Cannot view pictures | No card inserted or file name changed | Insert card, or use "PHOTOfunSTUDIO" software to transfer. Set [Playback Mode] to [Normal Play]. |
| Red areas in pictures appear blackened | Digital red-eye correction active | Close built-in flash, set flash to [], or set [Red-Eye Removal] to [OFF]. |
| Wi-Fi connection cannot be established | Radio waves disconnected, access point not displayed | Check communication range, interference from other devices, battery status, or camera placement. Ensure access point is operational and check radio wave conditions. |
| Wi-Fi not displayed on smartphone | Wi-Fi function setting issue | Switch smartphone's Wi-Fi function ON/OFF. |
| Cannot connect to Windows 8 PC | Incorrect username/password or OS version issue | Use local account username and password. Ensure system time matches. |
| Wi-Fi connection not recognized by PC | Workgroup name mismatch or incorrect login details | Change workgroup name in [Wi-Fi Setup]. Confirm login details. Match camera and computer system time. |
| Images cannot be transmitted to WEB service | Incorrect login information or image size | Confirm login details. Divide motion pictures or reduce image size. Transmit closer to access point. |
| Forgotten Wi-Fi password | Password lost | Execute [Reset Network Settings] in [Setup] menu. |
| No image on TV or blurred/uncolored | Incorrect connection or TV input not set | Check connection (→270). Ensure TV is switched to auxiliary input. |
| VIERA Link (HDMI) not working | VIERA Link setting incorrect | Set camera's [VIERA Link] to [ON]. Check VIERA Link settings on connected device. Turn camera off and on. |
| Cannot communicate with computer | Incorrect USB Mode | Set [USB Mode] to [PC(Storage)] (→200, 277). Turn camera off and on. |
| Computer does not recognize card (SDXC) | Compatibility or formatting prompt | Check computer compatibility. Do not format the card. Turn camera off before disconnecting cable if [Access] indicator is on. |
| Cannot print when connecting to printer | Printer incompatibility or incorrect USB Mode | Check printer compatibility with PictBridge. Set [USB Mode] to [PictBridge(PTP)] (→200, 280). |
| Picture edges cut off when printing | Trimming settings or aspect ratio mismatch | Release trimming/edgeless settings. Check if 16:9 sizes can be printed. |
| Lens makes clicking noise | Lens movement or aperture operation | This is not a malfunction. |
| Zooming stops instantaneously | Extended optical zoom in use | This is not a malfunction. |
| Red lamp illuminated (shutter halfway) | [AF Assist Lamp] set to [ON] | Set [AF Assist Lamp] to [ON] (→183). |
| Camera is hot | Normal operation; internal components warming up | This does not affect performance or quality. |
| Clock is incorrect | Long period of non-use | Reset the clock (→30). |
| Picture warped or colored edges when using zoom | Zoom ratio effect | This is not a fault. |