Brand: Panasonic
Category: Home Theater System
Document Type: Parts/Service
Language: EN
Available Languages: EN , ES
Parts/Service for DVD-S35E
Uploaded: Nov. 21, 2025, 7:29 p.m.
Warranty Information
No specific warranty period mentioned in the provided pages.
- Power On/Off: Switches the DVD player on or off from standby mode.
- Setup: Accesses the setup menu for player configuration.
- Open/Close: Opens and closes the disc tray.
- Playback Controls: Play, Pause, Stop, Skip (chapters/tracks), Slow Motion, Search.
- Menu Navigation: Top Menu, Menu, Cursor Keys, Enter, Return.
- Disc Information: Displays menu screens for DVD, RAM, or MP3 discs.
- Subtitle/Audio/Angle: Allows selection of subtitle languages, audio tracks, and camera angles.
- Display: Enables the on-screen display for various information.
- Position Memory: Resumes playback from a stored position.
Troubleshooting and error codes
| Error Code | Error Content | Additional error explanation |
| U11 | Focus error | |
| H01 | Tray loading error | |
| H02 | Spindle servo error | (Spindle servo, DSC SP motor, CLV servo error) |
| H03 | Traverse servo error | |
| H04 | Tracking servo error | |
| H05 | Seek error | |
| H06 | Power error | Cannot switch off the power because of the panel and system computer communication error |
| H07 | Spindle motor drive error | |
| F103 | Illegal highlight Position | Big possibility of disc specification violation during highlight display |
| F498 | No communication between Front Micro Computer and Main Micro Computer after power on | |
| F499 | No response from Main Micro Computer when key code is sent from Front Micro Computer to Main Micro Computer | Main Micro Computer hangs up |
| F4FF | Force initialize failure (time out) | |
| F500 | DSC error | DSC stops in the occurence of servo error (startup, focus error, etc) |
| F501 | DSC not Ready | DSC-system computer communication error (Communication failure caused by idling of DSC) |
| F502 | DSC Time out error | Similar disposal as F500 |
| F503 | DSC communication Failure | Communication error (result error occured although communication command was sent) |
| F505 | DSC Attention error | Similar disposal as F500 |
| F506 | Invalid media | Disc is flipped over, TOC unreadable, incompatible disc |
| F600 | Access failure to management information caused by demodulation error | Operation stopped because navigation data is not accessible caused by the demodulation defect |
| F601 | Indeterminate sector ID requested | Operation stopped caused by the request to access abnormal ID data |
| F602 | Access failure to LEAD-IN caused by demodulation error | LEAD IN data unreadable |
| F603 | Access failure to KEYDET caused by demodulation error | Access failure to CSS data of disc |
| F610 | ODC abnormality | No permission for command execution |
| F611 | 6626 QCODE don't read Error | Access failure to seek address in CD series |
| F612 | No CRC OK for a specific time | Access failure to ID data in DVD series |
| F630 | No reply to KEY DET (for internal use only) enquiry | |
| F631 | CPPM KEY DET is not available till the FILE terminal | (CPPM file system is unreadable caused by scratches) |
| F632 | CPPM KEY DET is not available | Been revoked or falsified |
| F103 | Illegal highlight Position | Big possibility of disc specification violation during highlight display |
| F700 | MBX overflow | When replying message to disc manager |
| F701 | Message command does not end | Next message is sent before replying to disc manager |
| F702 | Message command changes | Message is changed before it is sent as a reply to disc manager |
| F880 | Task number is not appropriate | Message coming from a non-existing task |
| F890 | Sending message when message is being sent to AV task | Sending message to AV task |
| F891 | Message couldn't be sent to AV task | Begin sending message to AV task |
| F893 | FROM falsification | |
| F894 | EEPROM abnormality | |
| F895 | Language abnormality | Firm version agreement check for factory preset setting failure prevention |
| F896 | No existence model | Firm version agreement check for factory preset setting failure prevention |
| F897 | Initialize is not completed | Initialize completion check for factory preset setting failure prevention |
| F8A0 | Message command is not appropriate | Begin sending message to AV task |