Brand: Panasonic
Category: Home Theater System
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for SC-HT500
Uploaded: Nov. 21, 2025, 6:27 p.m.
Warranty Information
Refer to the manual for specific warranty details; no general warranty period is stated.
Getting Started
- Unpack and identify all accessories.
- Connect speakers to the main unit (Step 2).
- Connect the main unit to your television using the appropriate cable (Step 3).
- Connect the subwoofer, antennas, and AC power lead (Step 4).
- Install batteries in the remote control (Step 5).
- Perform Quick Setup by following on-screen prompts (Step 6).
Basic Playback
- Insert a disc and press Play [ PLAY ].
- Adjust volume using the VOLUME controls.
- Pause playback with [ II ], and resume with [ PLAY ].
- Stop playback with [ ■ ].
Other Functions
- Use the remote control buttons for various functions like skipping tracks, repeat play, and sound field adjustments.
- Change settings like audio language, TV aspect, and AV output via the SETUP menu.
Troubleshooting and error codes
| Page | Problem | Check Points and Remedies | Page |
| 8 | No power. | Insert the AC mains lead and system cable securely. The unit was switched to standby by the sleep timer. | 9 |
| – | No response when buttons pressed. | Some operations may be prohibited by the disc. The unit may not be operating properly due to lightning, static electricity or some other external factor. Reset procedure: Press [■] to switch the unit to the standby mode and then back to ON. Alternatively, press [■] to switch the unit to the standby mode, disconnect the AC mains lead, and then reconnect it. | – |
| 9 | No operations can be performed with the remote control. | Check that the batteries are installed correctly. •The batteries are depleted: Replace them with new ones. •Point the remote control at the remote control sensor and operate. •Press [TV] first to operate the television. | 9 |
| – | Cannot switch on the television with the remote control. | •Condensation has formed: Wait 1 to 2 hours for it to evaporate. | – |
| 5, Cover | Play doesn't start (or stops immediately) when you press [ PLAY ] (play). | •This unit cannot play discs other than the ones listed in these operating instructions. • You can only play DVD-Video if their region number is the same or includes the same region number as the unit or if the DVD-Video is marked "ALL". Confirm the region number for the unit on the rear panel. •The disc may be dirty and may require cleaning. • Ensure that the disc is installed with the label of the side to be played facing upwards. •Check that the DVD-RAM has something recorded on it. | 5, 13 |
| 13 | Cannot select alternative languages. | •This function is dependent on software availability. | – |
| 13 | No menu play. | •Try selecting from the disc's menu if one is available. | – |
| 19 | No subtitles. | •This function is dependent on software availability. | – |
| 25 | The position of the subtitles is incorrect. | •This function is dependent on software availability. •Subtitles are cleared from the television. Display the subtitles. •Change the position of the subtitles with "Subtitle Position" in the GUI screen. | 19, 25 |
| – | Soundtrack and/or subtitle language is not the one selected with the SETUP menus. | •This function is dependent on software availability. | – |
| – | Cannot change angle. | •This function is dependent on software availability. Even if a disc has a number of angles recorded, these angles may be recorded for specific scenes only. | – |
| 17 | The SETUP menu cannot be accessed. | •Select "DVD/CD" as the source. •Cancel all group, program and random play. | – |
| – | Cannot add markers. | • You cannot add markers while playing a play list or if the disc's play time doesn't appear on the unit's display. | 17 |
| RAM | There are already markers. | •The unit reads and displays the markers added with a DVD video recorder. You can clear them but reappear when you switch the unit to standby, change the source, or open the disc tray. •The unit numbers markers by time so they change when you add and delete them. | – |
| RAM | Marker numbers I added are different when I call them up. | – | – |
| – | Cannot select random or program play. | • You cannot select random or program play with some DVD-Video. | – |
| – | Folders deeper than the eighth layer on a data CD are not displayed correctly. | •Folders deeper than the eighth layer are displayed as the eighth layer. | – |
| – | You have forgotten your ratings password. | While stopped and "DVD/CD" is the source, press and hold [■] on the unit and [≥10] on the remote control for about 3 seconds until "Initialized" disappears from the television. Turn the unit off and on again. All settings will return to the default values. | – |
| 7, 30 | No sound. | •Check the connections. • Turn the volume up. • Turn muting off. • Switch off the unit, determine and correct the cause, then switch the unit on. Causes include: -Shorting (bare wires touching) of positive and negative speaker wires. -Using speakers with an impedance lower than that rated for this unit. -Straining of the speakers through excessive volume or power. -Using the unit in a hot environment without proper ventilation. •An AC mains lead or fluorescent light is near the subwoofer. Keep other appliances and cords away from the subwoofer. | 7, 30 |