Brand: Panasonic
Category: Home Theater System
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for SC-PT560
Uploaded: Nov. 21, 2025, 7:59 p.m.
Warranty Information
Refer to the manual for specific warranty information.
Getting Started: Includes unpacking, speaker assembly and positioning, and cable connections.
Playing Discs: Covers basic playback, using the remote control, other playback functions like repeat and program play.
Other Operations: Details VIERA Link, FM radio enjoyment, sound effects, and iPod connectivity.
Reference: Information on playable discs, maintenance, troubleshooting, and specifications.
Troubleshooting and error codes
| Problem | Possible Cause and Solution | Page |
| Power | ||
| No power. | • Insert the AC mains lead securely. | 11 |
| The unit is automatically switched to standby mode. | • The Sleep timer was working and had reached the set time limit. | 14 |
| Unit displays | ||
| The display is dark. | • Select "BRIGHT" in "FL DIMMER" in the "OTHERS" menu. | 26 |
| "NO PLAY" |
• You inserted a disc the unit cannot play; insert one it can. • You inserted a blank disc. • You inserted a disc that has not been finalized. |
36 |
| "NO DISC" | • You have not inserted a disc; insert one. • You have not inserted the disc correctly; insert it correctly. |
16 |
| "OVER CURRENT ERROR" | • The USB device is drawing too much power. Switch to DVD/CD mode, remove the USB and turn the unit off. | 9 |
| "F61" | • Check and correct the speaker cable connections. If this does not fix the problem, consult the dealer. |
9 |
| "F76" | • There is a power supply problem. Consult the dealer. | — |
| "DVD U11" | • Disc may be dirty. Wipe it clean. | 37 |
| "ERROR" | • Incorrect operation performed. Read the instructions and try again. | — |
| (For PT860 only) | ||
| • Ensure that necessary preparations have been made before Auto speaker setup. | 33 | |
| • Check and correct the speaker cable connections if you are doing Auto speaker setup. | 9 | |
| • The volume might be muted. Cancel muting before Auto speaker setup. | 14 | |
| "DVD H□" or "DVD F□" stands for a number. |
Trouble may have occurred. The numbers following "H" and "F" depend on the status of the unit. Turn the unit off and then back on. Alternatively, turn the unit off, disconnect the AC mains lead, and then reconnect it. • If the service numbers fail to clear, note the service number and contact a qualified service person. |
— |
| "U70" stands for a number. |
•The HDMI connection acts unusually. -The connected equipment is not HDMI-compatible. -Please use HDMI cables that have the HDMI logo (as shown on the cover). -The HDMI cable is too long. -The HDMI cable is damaged. |
— |
| "REMOTE 1" or "REMOTE 2" | • Match the modes on this unit and remote control. Depending on the number being displayed (“1” or “2”), press and hold [OK] and the corresponding numbered button ([1] or [2]) for at least 2 seconds. | 14 |
| "NO MIC" (PT860) | •The Auto speaker setup microphone is not inserted. Check whether the Auto speaker setup microphone is plugged in properly into the “SETUP MIC” jack. | 33 |
| "NOISY" (PT860) | • Excessive ambient noise in the room. Perform the setup again and keep quiet during the Auto speaker setup. | — |