Manual for SC-PT760

Manual for SC-PT760

Brand: Panasonic

Category: Home Theater System

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 6:35 p.m.

Warranty Information

Provides a limited warranty for parts and labor for one year, with specific exclusions.

Simple Setup

  1. Assembling the speakers: Follow step-by-step instructions to connect pipes, bases, and speakers.
  2. Positioning: Place speakers optimally for sound quality, considering subwoofer placement and avoiding interference.
  3. Cable connections: Connect audio/video sources, speakers, and antennas, including HDMI for improved picture quality.
  4. Digital transmitter connection: Insert the digital transmitter into the main unit.
  5. AC cord connections: Connect the AC power cords, ensuring correct voltage settings.
  6. Preparing the remote control: Insert batteries into the remote control.
  7. Performing QUICK SETUP: Follow on-screen prompts to set language, TV type, and aspect ratio.
  8. Presetting the radio stations: Automatically or manually set FM/AM radio stations.

Playing Discs

  1. Basic play: Turn on the unit, select source, load discs, and start playback.
  2. Other playback functions: Explore CD Mode, repeat play, program play, and random play.

Using on-screen menus

  • Access and navigate menus for Disc/Play, Video, Audio, and HDMI settings.
  • Adjust settings like play speed, repeat mode, subtitles, and audio language.

Changing the player settings

  • Access the setup menu to modify DISC, VIDEO, AUDIO, DISPLAY, HDMI, and OTHERS settings.
  • Configure audio language, subtitle language, menus language, ratings, and password.

Troubleshooting and error codes

Problem Possible Cause/Solution Page
Power
No power. • Insert the AC supply cord securely. 11
The unit is automatically switched to standby mode. • The Sleep timer was working and had reached the set time limit. 14
Unit displays
The display is dark. • Select "BRIGHT" in "FL DIMMER" in the "OTHERS" menu. 24
"NOPLAY" • You inserted a disc the unit cannot play; insert one it can.
• You inserted a blank disc.
• You inserted a disc that has not been finalized.		 32
"NODISC" • You have not inserted a disc; insert one.
• You have not inserted the disc correctly; insert it correctly.		 16
"F61" • Check and correct the speaker cable connections.
If this does not fix the problem, consult the dealer.		 9
"F76" • There is a power supply problem. Consult the dealer. –
"DVD U11" • Disc may be dirty. Wipe it clean. 33
"ERROR" • Incorrect operation performed. Read the instructions and try again. –
"DVD HO”
"DVD FO”
stands for a number.		 • Trouble may have occurred. The numbers following "H" and "F" depend on the status of the unit. –
"W1" is flashing. • Turn the unit off and then back on. Alternatively, turn the unit off, disconnect the AC supply cord, and then reconnect it.
• If the service numbers fail to clear, note the service number and contact a qualified service person.		 11, 14
"U70"
stands for a number.
The actual number following "U70"
will depend on the state of the main unit.		 • There is no link between the main unit and the wireless system. Check that the wireless system is plugged into the AC outlet and is turned on.
• Ensure that the digital transmitter is fully inserted into the slot of the main unit.		 11
"REMOTE 1" or "REMOTE 2" • The HDMI connection acts unusually.
The connected equipment is not HDMI-compatible.
Please use HDMI cables that have the HDMI logo (as shown on the cover).
The HDMI cable is too long.
The HDMI cable is damaged.		 –
"LOADING" • Match the modes on the main unit and remote control. Depending on the number being displayed ("1" or "2"), press and hold [OK] and the corresponding numbered button ([1] or [2]) for at least 2 seconds.
• The iPod is not ready. Wait for this display to disappear.
• Disconnect the iPod, and then reconnect it firmly.		 14
General operation
No response when any buttons are pressed. • This unit cannot play discs other than the ones listed in these operating instructions.
• The unit may not be operating properly due to lightning, static electricity or some other external factor. Turn the unit off and then back on. Alternatively, turn the unit off, disconnect the AC supply cord, and then reconnect it.
• Condensation has formed. Wait 1 to 2 hours for it to evaporate.		 32
No response when remote control buttons are pressed. • Check that the batteries are installed correctly.
• The batteries are depleted. Replace them with new ones.
• Aim the remote control at the remote control signal sensor and operate.
• Change the remote control operating mode.		 30
11
11
15
Other products respond to the remote control. • Change the remote control operating mode. 14
Cannot play DVDs. • CD Mode is on. Press and hold [–CD MODE] to turn CD Mode off. 18
No picture or sound. • Check the video or speaker connection.
• Check the power or input setting of the connected equipment and the main unit.
• Check that the disc has something recorded on it.		 8, 9
You have forgotten your ratings password. • While stopped and "DVD/CD" is the source, press and hold [■] (Stop) on the main unit and [10] on the remote control until "INITIALIZED" disappears from the TV. Turn the unit off and on again. All settings will return to the default values.
(This does not work during program and random modes, or when setup menu or START menu is displayed.)		 –
The VIERA Link "HDAVI Control" function does not respond. • Depending on the condition of this unit or the connected equipment, it may be necessary to repeat the same operation so that the function can work correctly. 26
The setting you made in "TV ASPECT" (→ 23, "VIDEO" menu) or "LANGUAGE" (→ 24, "DISPLAY" menu) does not work. • The settings for "TV ASPECT"*1 and "LANGUAGE"*2 will automatically follow to the settings of the TV. Select using TV settings.
*1 When using VIERA Link "HDAVI Control" with "HDAVI Control 3" compatible TV
*2 When using VIERA Link "HDAVI Control" with "HDAVI Control 2 (or later)" compatible TV
Privacy Policy