Brand: PARKSIDE
Category: Garden Tools
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for PAMRS 1000 A1
Uploaded: Nov. 21, 2025, 6:53 p.m.
Warranty Information
This product comes with a 3-year warranty from the date of purchase.
Operation Summary
This manual provides instructions for operating the PARKSIDE PAMRS 1000 A1 Smart robotic lawnmower. Key operations include installation of the charging station, laying the boundary wire, setting up the mowing schedule, and general maintenance. Safety precautions are emphasized throughout, covering electrical safety, personal protective equipment, and proper handling of the device and its components. The manual also details troubleshooting steps and disposal guidelines.
Troubleshooting and error codes
| Problem | Possible Cause | Troubleshooting |
|---|---|---|
| Apparatus does not start | Battery (33) not inserted | Insert battery (see Insertion and removal of battery, p. 442) |
| Apparatus does not start | Rechargeable battery (33) is empty | Charge battery (see separate operating instructions for battery and charger) |
| Apparatus does not start | Motor is defective | Contact our service center. |
| Apparatus does not start | Boundary wire (10) not connected correctly or is defective | Check the LED display (30) on the charging station (20) 1. LED flashes green: Boundary wire (10) damaged or not connected. 2. LED lights up solid green: Boundary wire (10) connected correctly. Check the +/- connection cable on the charging station (20) |
| Apparatus does not start | Product is not in the charging station (20) or is placed inside the boundary wire (10) | Place the product in the charging station (20) or within the boundary wire (10) |
| Grass is too long | Obstruction due to foreign objects | Remove foreign objects |
| Motor stops | Cutting height too low | Set a higher cutting height |
| Work result is unsatisfactory or motor runs sluggishly | Blade (19) is dull | Have the blade (19) sharpened or replaced |
| Work result is unsatisfactory or motor runs sluggishly | Blade area is clogged | Clean the apparatus |
| Work result is unsatisfactory or motor runs sluggishly | Blade (19) is installed incorrectly | Install the blade (19) correctly |
| Blade (19) does not rotate | Blade (19) is blocked by grass | Remove grass |
| Blade (19) does not rotate | Blade screw (18) is loose | Tighten blade screw (18) |
| Abnormal noise, rattling or vibration | Blade screw (18) is loose | Tighten blade screw (18) |
| Abnormal noise, rattling or vibration | Blade (19) is damaged | Replace blade (19) |
| Product runs beyond the defined area | Incorrect cable routing: 90° corners can cause signal interference | Round off corners or lead with a 45° angle |
| Product runs beyond the defined area | Boundary wire (10) not connected correctly or is defective | Check the LED display (30) on the charging station (20) 1. LED flashes green: Boundary wire (10) damaged or not connected. 2. LED lights up solid green: Boundary wire (10) connected correctly. Check the +/- connection cable on the charging station (20) |
| Product runs beyond the defined area | Too high incline/decline in the boundary wire (10) area. | The incline should be max. 35% within a distance of 30 cm to the boundary wire (10). The decline should be max. 17% within a distance of 40 cm to the boundary wire (10). |
| Product runs beyond the defined area | The charging station (20) is not installed according to regulations, which can cause signal interference. | The approach area of the charging station (20) must have the boundary wire (10) laid in a straight line for at least 200 cm, and the cable laid in a straight line for at least 100 cm behind the charging station (20). The power supply (14) and boundary wire (10) must not be laid in loops, nor stored near the charging station (20). |