Brand: PARKSIDE
Category: Garden Tools
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for PAMT 20-Li A1
Uploaded: Nov. 21, 2025, 7:52 p.m.
Warranty Information
This product comes with a 3-year guarantee from the date of purchase for material or manufacturing defects.
Introduction: Congratulations on purchasing your new battery-powered multi-trimmer. This device is intended for cutting grass in gardens and along bed edges. It is part of the X 20 V TEAM series, compatible with batteries and chargers from this series.
Proper Use: Use the device only for cutting grass. Do not use it for hedges or shrubs, in the rain, or in damp environments. The device is for adult use only.
Preparation: Before use, unfold the illustration page and familiarize yourself with all functions. Assemble the device, attach the auxiliary handle, adjust the telescopic tube, motor head, and cutting angle as needed. Ensure the protective cover is fitted correctly.
Operation: Insert the battery, switch on the device using the switch lock and on/off switch. Trim grass by swiveling the device and cutting slowly at a slight forward tilt. For lawn edge trimming, adjust the motor head to 180° and cutting angle to 5. The spacer protects plants.
Maintenance: Remove the battery before cleaning or maintenance. Clean with a damp cloth. Replace spools as needed. Store the device clean, dry, and out of reach of children.
Troubleshooting: Address issues like the device not starting (charge battery, check insertion), interruptions (check switch, motor), or vibrations (clean unit, check motor) by following the provided table.
Troubleshooting and error codes
| Problem | Possible cause | Troubleshooting |
|---|---|---|
| Device does not start | Rechargeable battery (6) discharged | Charge the battery (see the separate operating instructions for the rechargeable battery and charger) |
| Rechargeable battery (6) not inserted | Inserting the battery, p. 36 | |
| On/Off switch (3) is broken | contact the service centre. | |
| Device works with interruptions | Internal loose contact | contact the service centre. |
| On/Off switch (3) is broken | contact the service centre. | |
| Strong vibrations, loud noises | Cutting unit dirty | Clean the cutting unit (see Cleaning, maintenance and storage, p. 36) |
| Defective motor | contact the service centre. | |
| Bad cutting results | The line spool (18) does not have enough cutting line | Extending the cutting line, p. 34 |
| Replacing the spool, p. 37 | ||
| The cutting line is not guided out of the spool cap (20) | Remove the spool cover (31) from the spool cap and thread the cutting line through the line outlet loop (19) to the outside, then close the spool cover again | |
| Cutting unit dirty | Clean the cutting unit (see Cleaning, maintenance and storage, p. 36) | |
| Low battery power | Charge the battery (see the separate operating instructions for the rechargeable battery and charger) |