Brand: PARKSIDE
Category: Garden Tools
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for PRMA 20-Li A1
Uploaded: Nov. 21, 2025, 7:47 p.m.
Warranty Information
3-year warranty on material or manufacturing defects, excluding normal wear and tear.
Starting the Lawnmower:
- Ensure the mower is on a level surface.
- Lift the cover of the battery compartment.
- Slide the charged battery into the compartment until it clicks.
- Insert the safety key.
- Press the release button and hold it while pressing the start lever.
- Release the release button.
Stopping the Lawnmower:
- Release the start lever.
Important Notes:
- The blade continues to rotate for a few seconds after stopping. Do not touch the blade.
- Always work with the grass catcher or mulch kit installed.
- Never operate the mower without the safety features.
Grass Catcher/Mulch Kit:
- To attach the grass catcher, lift the collision guard and hang the catcher. Then fold the guard over the catcher.
- To attach the mulch kit, remove the grass catcher, lift the collision guard, insert the mulch kit, and fold the guard over it.
Adjusting Cut Height:
- Press the height adjustment lever away from the device.
- Move the lever past the notches to the desired cutting height.
Troubleshooting and error codes
| Problem | Possible Cause | Troubleshooting |
|---|---|---|
| Device does not start | Battery empty or not inserted | Check battery charge, repair by electrician if necessary |
| Release button or start lever defective | Repair by Service-Center | |
| Brushes worn out | Repair by Service-Center | |
| Motor defective | Repair by Service-Center | |
| Motor cuts out | Grass too long | Set a higher cutting height. Lightly lift front wheels by pressing handles. |
| Blockage by foreign object | Remove foreign object | |
| Poor mowing result or motor works heavily | Cutting height too low | Set a higher cutting height |
| Blade (19) blunt | Have blade sharpened or replaced | |
| Blade area clogged | Clean the device | |
| Blade (19) installed incorrectly | Install blade correctly | |
| Blade does not rotate | Blade (19) blocked by grass | Remove grass |
| Blade bolt (20) loose | Tighten blade bolt | |
| Abnormal noise, rattling or vibration | Blade bolt (20) loose | Tighten blade bolt |
| Blade (19) damaged | Replace blade |