Brand: PARKSIDE
Category: Tools
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for PHET 15 C2
Uploaded: April 20, 2026, 7:58 p.m.
Manual Publish Date: 2023-11-01
Warranty Information
This product comes with a 3-year warranty from the date of purchase, covering material or manufacturing defects.
Initial use
Always activate the switch lock to lock the trigger and disconnect the product from the mains before starting any work.
Adding staples/nails
Turn the product over, squeeze the release button, and pull out the push rod from the magazine. Add staples or nails to the magazine according to the icons. Slide the push rod back until the magazine is closed. The release button must click into place.
Stapling and nailing
Press the switch lock to the 'Unlock' position. Press the safety contact into the workpiece. Squeeze the trigger while holding the product against the workpiece to drive a staple/nail.
Clearing jammed staples or nails
Activate the switch lock, disconnect from mains. Open the magazine and pull out the push rod. Remove the jammed staple or nail.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Jammed staple or nail | Improper staple/nail length | Use the next shorter staple or nail. |
| Staple/nail not fully driven | Not holding product firmly | Hold product firmly and press on work surface before firing. |