Manual for MX3950D

Manual for MX3950D

Brand: PHILIPS

Category: Audio

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 7:14 p.m.

Manual Publish Date: 2003-02-25

Warranty Information

This is a one-year limited warranty covering parts and labor for free repair or replacement.

  • Connections: Connect speakers, subwoofer, TV, antennas, and power cord. Optional connections for VCR, cable/satellite box, and digital audio equipment are also detailed.
  • Getting Started: Insert batteries into the remote, set the clock, adjust TV settings (NTSC/PAL, TV System), select speaker layout, and set language preferences.
  • Disc Operations: Learn how to play various disc types (DVD, VCD, CD, MP3), manage disc menus, and utilize playback controls.
  • Timer Operations: Set the timer to wake up the system and configure the sleep timer for automatic shutdown.
  • Sound and Volume Controls: Adjust surround sound modes, clear voice effect, subwoofer volume, bass/treble, digital sound effects, and master volume.
  • Other Functions: Switch the system on/off, select modes (active, Eco Power standby), dim the display, record to external devices, and operate your TV.
  • Troubleshooting: Common problems and their solutions are provided, covering power, picture, sound, and system operation issues.

Troubleshooting and error codes

ProblemSolution
No power.Check if the AC power cord is properly connected. Press the STANDBY ON on the front of the DVD system to turn on the power.
No picture.Refer to your TV's manual for correct Video In channel selection. Change the TV channel until you see the DVD screen. Press DISC on the remote. Switch the P-SCAN at the back panel to "OFF" position if you are not using a Progressive Scan TV.
Distorted or poor picture.Check the video connection. If both S-Video and Component (Pr PbY) Video connections are used to connect to your TV, the video signal will go to S-Video automatically every time when you power up the DVD system. To change the setting, refer to 'Video Output'. Sometimes a small amount of picture distortion may appear. This is not a malfunction. Clean the disc.
Completely distorted picture or black/white picture.TVs have a color system standard. If the disc's or DVD system's color system is different than your TV's color system, the picture may be distorted or colorless. Set to the correct 'TV System' setting.
The aspect ratio of the screen cannot be changed even though you have set the TV display.The aspect ratio is fixed on the DVD disc. Depending on the TV, it may not be possible to change the aspect ratio.
No sound or distorted sound.Adjust the volume. Replace the speaker cables. Check the speaker connections and settings. Disconnect the headphones. Press PLAY to resume normal play mode if necessary. Press the correct source button on the remote (TV/AV or AUX, for example) to choose the equipment that you want to hear through the DVD system.
The DVD system does not work.Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try to operate again as usual.
The DVD player does not start playback.Insert a readable disc with the playback side facing down. Check the disc type, color system and region code. Check for any scratches or smudges on the disc. Press SYSTEM SETUP to turn off the setup menu screen.
Cannot activate some features, such as Angles, Subtitles, or multi-language Audio.Change the rating level. Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour. The features may not be available on the DVD. Changing the language for the sound or subtitle is prohibited on the DVD.
There is no sound from the center and surround speakers.Make sure the center and surround speakers are connected correctly. Press SURROUND button to select a correct surround sound setting. Make sure the source you are playing is recorded or broadcast in surround sound (DTS, Dolby Digital, etc.)
Radio reception is poor.If the signal is too weak, adjust the antenna or connect an external antenna for better reception. Increase the distance between the system and your TV or VCR. Tune in to the correct frequency. Place the antenna farther away from any equipment that may be causing the noise.
The remote control does not function properly.Select the source (DISC or TUNER, for example) before pressing the function button. Reduce the distance between the remote control and the system. Replace the batteries with new ones. Point the remote control directly toward the IR sensor. Check that the batteries are loaded correctly.
The timer is not working.Set the clock correctly. Press and hold CLOCK TIMER to switch on the timer.
The display panel is dark.Press DIM again.
Low hum or buzz sound.Place the DVD system as far away as possible from electrical devices that may be causing interference.
Privacy Policy