Manual for SHC5200

• Before first use, charge batteries for at least 12 hours.
• Use only Philips rechargeable NiMH batteries with metal sleeves.
• AAA alkaline batteries can power headphones but cannot be charged by the system.
• If audio source volume is insufficient, the transmitter auto-shuts off.

1. Install/replace batteries (Fig. B).
2. Install antenna tube into transmitter (Fig. C).
3. Power on transmitter (Fig. D). Red LED: on when audio source connected, blinks if no audio for 2 mins, off if no audio for 4 mins.
4. Charge headphones by connecting charging cable (Fig. E). Headphones: red LED off during charge. Transmitter: green LED on during charge, off when fully charged.
5. Power on headphones (Fig. F). Red LED on.
6. Connect audio device to transmitter (Fig. G). Red LED on when audio source connected.

Tip: If interference occurs, tune transmitter and headphones to the same channel (Fig. H).