Brand: PHILIPS
Category: Audio
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for TAH4205
Uploaded: Nov. 21, 2025, 7:37 p.m.
Warranty Information
Information about warranty is not directly provided in this section of the manual.
Get Started
Charge the battery
Connect the supplied USB charging cable to the Type-C USB charging slot on the headphones and a computer's USB port. The LED turns white during charging and off when fully charged. A full charge takes approximately 2 hours.
Pair the headphones with your mobile phone
Ensure headphones are charged and turned off. Press and hold the power button for 6 seconds until blue and white LEDs flash alternately. Ensure your mobile phone's Bluetooth is on. Activate Bluetooth and select 'Philips TAH4205' on your phone. The headphones store the last 8 devices.
Use your headset
Connect the headset to your Bluetooth device
Turn on your mobile/Bluetooth device. Press and hold the on/off button for 2 seconds to turn headphones on. The white LED turns on. The headphones automatically reconnect to the last connected device.
Manage your calls and music
On/off: Press and hold for 2 seconds to turn on, 3 seconds to turn off.
Music control: Press the music/call control button once to play/pause. Press +/- for volume. Press twice for next/previous track.
Call control: Press music/call control once to pick up/hang up. Press and hold for 2 seconds to switch caller.
Troubleshooting and error codes
| Headphones status | Indicator |
|---|---|
| The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music. | The blue LED will flash every 7.5s . |
| The headphones are ready for pairing. | The LED flashes blue and white alternately. |
| The headphones are on but not connected to a Bluetooth device. | The Blue LED flashes slowly. If no connection can be made, the headphones will turn itself off within 5 minutes. |
| Low battery level. | The white LED flash 4 times per second until it is out of power |
| Battery is fully charged. | White LED is off. |