Brand: PHILIPS
Category: Audio
Document Type: Manual
Language: EN
Manual for TAT1108
Uploaded: Nov. 21, 2025, 6:25 p.m.
Warranty Information
Refer to www.philips.com/support for warranty information.
Charging: Place earpieces in the charging box. Connect the charging case to a power source using the USB-C cable. A full charge takes approximately 2 hours.
Wearing: Select the correct ear tip size for a secure and comfortable fit. Insert earpieces into ears and twist slightly.
Pairing: Take earpieces out of the charging case; LEDs will flash white and blue. Turn on Bluetooth on your device and select 'Philips TAT1108'.
Controls: Press MFB once to play/pause music or pick up calls. Double press to skip tracks or reject calls. Press and hold for Voice Assistant.
Power On/Off: Earpieces power on when removed from the case and power off when returned.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| Earpieces do not turn on. | Charge the earpieces. |
| Cannot pair with Bluetooth device. | Ensure Bluetooth is enabled on your device. Delete 'Philips TAT1108' from your device's Bluetooth list and re-pair. Ensure no other Bluetooth devices are connected. |
| Bluetooth device cannot find earpieces. | Earpieces might be connected to another device. Turn off the other device or move it out of range. Reset pairing if necessary. |
| Music plays on phone speaker, not earpieces. | Refer to your phone's manual to select audio output through earpieces. |
| Poor audio quality or crackling. | Move closer to your Bluetooth device, remove obstacles, or charge the earpieces. |
| Poor audio quality when streaming, slow or no connection. | Ensure your phone supports HFP and A2DP profiles and is BT4.0x or higher compatible. |
| Right and left earpieces disconnected. | Place both earpieces in the charging box with the cover open. Shortly press the casing button 3 times. |