Brand: PHILIPS
Category: Electronics
Document Type: Manual
Language: EN
Manual for 3139 125 38891
Uploaded: Nov. 21, 2025, 6:25 p.m.
Manual Publish Date: 2007-01-01
Warranty Information
Contact Philips Customer Service for worldwide guarantee information.
Introduction:
- Register your product at www.philips.com/welcome for support.
- This manual covers installation and operation of your TV.
- Contact Philips Customer Service for assistance.
- Mounting the TV: Follow VESA standards, ensure 30mm+ clearance from wall.
- Connecting: Connect aerial and mains cords firmly.
- Powering On: Use the POWER key on the side or P+/- on the remote.
- Remote Control: Insert batteries correctly.
- Channels: Use PROGRAM+/-, numerical keys, or A/D to switch modes.
- Menus: Use MENU to access setup, installation, preferences, etc.
- Volume: Use +VOL - keys.
- Teletext: Access via TELETEXT key.
- Picture/Sound Settings: Access via Options menu or dedicated buttons.
- Software Updates: Automatic updates available.
- Favourites: Create up to four lists of favorite channels.
- High Definition: Connect and configure HD equipment.
- PC Monitor: Use TV as a PC monitor via HDMI/DVI.
- Troubleshooting: Check common issues like no display, poor reception, no sound.
Troubleshooting and error codes
| Symptom | Possible solutions |
|---|---|
| No display on screen | • Check power cord connection. • Disconnect and reconnect power plug after 60 seconds. • Press ⏏ key on remote. |
| Poor reception (snowy noise) | • Check aerial connection to TV and wall socket. • Adjust picture settings (see page 24). • Verify correct TV system (see page 24). |
| No picture | • Verify cable connections (aerial, power, etc.). • Verify correct source selection. • Verify child lock is off. |
| No sound on certain channels | • Check correct TV system selection (see page 24). |
| No sound | • Verify volume is not at minimum. • Check mute mode; press 🔕 key to deactivate. • Verify peripheral equipment connections. |
| Sound interference | • Switch off other electrical appliances. |
| Unable to understand the selected language on screen to operate set in digital mode | • Press ☰ (MENU) to exit screen. • Press ☰ (MENU) to display menu. • Navigate menus using directional keys and OK. • Select correct language and confirm with OK. • Press ☰ (MENU) to exit. |
| TV not responding to remote control | • Move closer to TV sensor. • Check battery placement. • Change batteries. |
| No digital channels | • Contact dealer about Digital Video Broadcasting Terrestrial signal availability. |
| One or a few tiny spots on the screen that do not change colour along with the video picture | • This is not a problem; it's due to panel technology. |
| Intermittent or flickering picture in HD mode | • Check connected equipment (DVD, set-top box) manual. • Use standard-compliant HDMI-DVI/HDMI-HDMI cable. |
| No sound or picture but front panel red light is on | • Press ⏏ key on remote. |
| PC modes do not work | • Check connections. • Select correct source via AV key. • Configure computer to compatible display resolution. • Check graphic card setting. |
| S-Video colour becomes faint | • Check SVHS cable connection. |
| Black bar on top and bottom of screen in PC mode | • Change PC refresh rate to 60 Hz. |
| AC3 not available | • Press 🔊 key to select alternative audio. |
| TV aerial cannot be powered by set | • This set does not support powering TV aerials. |
| Changing from one channel to another channel takes a long time | • Pay TV channels take longer to decode; this is normal. |
| Cannot access digital menu | • Check if TV is in analogue mode; press A/D to switch to digital. |