Brand: PHILIPS
Category: Electronics
Document Type: Manual
Language: EN
Manual for CAM102B
Uploaded: Nov. 21, 2025, 7:28 p.m.
Warranty Information
Refer to local consumer protection laws for warranty information.
- Record Video: Switch mode to video, hold steady, aim lens, press shutter to start recording (red indicator), press again to stop.
- Take Pictures: Switch mode to photo, hold steady, aim lens, press shutter halfway for focus, press completely to take picture.
- Play Files: Switch to play mode, select picture/video, press play for video.
- Delete Files: Select file, enter delete mode, confirm deletion.
- View on TV: Connect via HDMI cable to TV.
- Software Installation: Connect camcorder to PC, run setup.
- Transfer to PC/Mac: Connect camcorder, find files in My Computer, copy to PC/Mac.
- Adjust Settings: Access settings menu, navigate and select options for time, language, resolution, etc.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
| No response | Camcorder in power-off mode. | Turn on camcorder. |
| Battery drained. | Charge the battery. | |
| [Memory full!] displayed | Micro SD card not inserted correctly. | Ensure card is inserted correctly. |
| Memory used up. | Save files to computer and delete from camcorder, or clear memory. | |
| No access to folders from computer | USB connection incorrect. | Ensure correct USB connection. |
| Camcorder turned off automatically. | Press ►II to turn on again. | |
| Blurry video/pictures | Camcorder not held steady. | Hold camcorder steady. |
| Camcorder moved too fast during capture. | Avoid fast movements. | |
| Not using a tripod when necessary. | Use a tripod if necessary. | |
| Distorted video/pictures on TV | Incorrect TV system selected. | Select the correct TV system. |
| Camcorder stopped responding | System error. | Manually reset the camcorder using the reset button under the HDMI cover. |