Manual for DVD711

Name: Manual for DVD711
Brand: PHILIPS
Availability: InStock

Brand: PHILIPS

Category: Electronics

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 6:52 p.m.

Operation Summary

Loading Discs:

Press OPEN/CLOSE, load disc label-side up, press OPEN/CLOSE to close.

Playing a DVD-Video disc:

Playback starts automatically. Use menu keys to navigate. Press T-C to select title/chapter. Press ► for next title, or ►► to stop.

Playing a Video CD:

Playback starts automatically. Use SOUND key for audio options. Press ►► to stop.

General Features:

Use T-C to move between titles/tracks. Use ► and ►► to move between chapters/indexes. Enter numerical keys for direct access.

Still Picture and Frame-by-frame playback:

Select (picture by picture) from the menu bar, then use cursor keys to select frames. Press ► or ►► to exit.

Search:

Select (Fast motion) from the menu bar, use digit keys to select speed. Press OK to play at normal speed. Hold ► or ◄ to search at different speeds.

Repeat:

Press REPEAT to cycle through chapter, title, or disc repeat modes. Press REPEAT again to exit.

Repeat A-B:

Press REPEAT A-B at start and end points to repeat a sequence.

Shuffle:

Press SHUFFLE to change playing order of chapters or tracks. Press SHUFFLE again to return to normal play.

Time Search:

Select (Time Search), press ►, enter desired time with digit keys, press OK.

Zoom:

Select (Zoom) from menu bar, choose zoom factor (1.33, 2, 4). Press OK to pan. Press ► to exit Zoom mode.

FTS-Video:

Store favorite titles/chapters/tracks. Select Video FTS in menu bar. Use keys to select, OK to store. Erase tracks or the entire program as needed.

Special DVD Features:

Access Title/Disc menus via MENU DVD. Change Camera Angle using ▼/▲ keys. Change Audio Language and Subtitles by selecting respective icons.

Special VCD Features:

Playback Control (PBC) allows menu navigation. Playing an Audio CD starts automatically. Use remote for Pause, Search, Moving to another track, Shuffle, Repeat, and Repeat A-B.

Troubleshooting and error codes

Symptom	Remedy
No power	Make sure the AC cord is properly connected. Check if there is power at the AC outlet by plugging in another appliance.
No picture	Check if the TV is switched on. Check the video connection.
Distorted picture	Check the disc for fingerprints and clean with a soft cloth, wiping from center to edge. Sometimes a small amount of picture distortion may appear. This is not a malfunction.
Completely distorted picture or no color with player menu.	If the picture is distorted completely or if the picture rolls vertically, make sure the NTSC/PAL setting at the DVD player matches the video signal of your television. If your TV video signal is NTSC, select the NTSC setting at the DVD player. If your video signal is PAL, select the PAL setting - see NTSC/PAL SETTINGS.
Distorted or Black/White picture with DVD or Video CD.	The disc format does not match your TV's video signal (PAL/NTSC).
No sound	Check audio connections. If you are using a HiFi amplifier, try another sound source.
Distorted sound from HiFi amplifier.	Check to make sure that no audio connections are made to the amplifier phono input.
No audio at digital output.	Check the digital connections. Check the settings menu to make sure the digital output is set to ALL or PCM. Check if the audio format of the selected audio language matches your receiver capabilities.
Disc can't be played.	Ensure the disc label is facing up. Clean the disc. Check if the disc is defective by trying another disc. Check to see if the disc is defective, badly scratched or warped (not flat)
No return to start-up screen when disc is removed.	Reset by switching the player off, then on again. Check to see if the program requires another disc to be loaded.
The player does not respond to the remote control.	Aim the remote control directly at the sensor on the front of the player. Remove any obstacles between the player and the remote control. Inspect or replace the batteries in the remote control.
Buttons do not work.	In order to completely reset the player, unplug the AC cord from the AC outlet for a few seconds.
Player does not respond to all operating commands during playback.	Operations are not permitted by the disc. Refer to the instructions of the disc.
DVD-Video player cannot read CDs/DVDs correctly.	Use a commonly available cleaning CD/DVD to clean the lens before taking the DVD-Video player to be repaired.